User manual LG WT-R1375TH

[. . . ] Please read this manual carefully before operating your washing machine and retain it for future reference. The Turbo Drum DD washing machine does not operate with the lid open. Smart Drum with Drum Washing Type is more hygienic and cleaner washer tub that protects the fabric and prevents damages. A built-in load sensor automatically detects and measures the laundry load and a microprocessor optimizes washing conditions such as ideal water consumption and washing time. [. . . ] If adjustments are needed during the wash, press the START/PAUSE button before making any changes. ⷠWhen the button is pressed during washing, the remaining time is displayed. Use to lock or unlock the control buttons to prevent settings from being changed by a child. To lock, push the RINSE and SPIN buttons simultaneously and to unlock push them one more time during the washing process. * For optimizing the washing algorithm, the displaying time may be changed during washing-increased by 8minutes at maximum and decreased by 4 minutes at maximum. * If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically adds rinsing, and the remaining time may be increased. So, it does not matter that the user uses it according to her/his washing habit. * The sensor for a Detergent quantity is designed to detect based on a synthetic Detergent powder. If you put a liquid one or a natural one or too much bleaching agent, the detecting ability of the sensor may be decreased. During being detected by the sensor, the LED flashes green, orange and red in turn. And, after detecting, the LED lights a specific color according to the detecting condition as follows: If the current washing condition (Detergent quantity, Water Temperature, water quality, etc. ) is determined as better than the standard one, it optimizes the algorithm to save the energy by decreasing washing time/strength, and the LED automatically turns to red. If the current washing condition is determined as worse than the standard one, it optimizes the algorithm by increasing washing time/strength, and the LED automatically turns to orange. If the current washing condition is determined as equal to the standard one, the algorithm has no change and the LED turns to green. ⷠPush again and power goes on or off · The power goes off automatically about 10 seconds after the wash is finished. The following settings are indicated as the button is pushed 3 4 5 . To cancel delay time, turn the power switch off. ⷠThis button allows you to select 8 different programs for different kinds of laundry and dirtiness. * Because the detecting ability of the sensor may be decreased by using it for a long time, periodically use TUB CLEAN course to clean the tub. (refer to page 21) * Even if the water level is changed by the user in FUZZY(Normal) Program, the sensor will still work. The sensor algorithm may differ according to models. * The control panel may differ according to different models. [. . . ] Wash with BLANKET or SOAK & BLANKET wash cycle for heavy soiled laundry. Pretreat stain and heavy soil according to directions shown on page 9. Do not overfill fabric softener dispenser and do not pour liquid fabric softener directly onto fabric. Keep the recommendations against Scrud(waxy buildup). [. . . ]