User manual LG Z42PX2D

[. . . ] The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. NOTE TO CABLE/TV INSTALLER: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the National Electric Code (U. S. A. ). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. REGULATORY INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] * Selecting the Cinema 3:2 Mode * Selecting the Black Level Press 4 use the D /E G button and then button to select On or Off . Press the G button and then use D / E button to select Low or High. Low The reflection of the screen gets darker. High The reflection of the screen gets brighter. Press EXIT button to return to 5 to return to the previous menu. TV viewing or press MENU button 36 Operation Video Reset EZ Picture Color Temperature DB Advanced Video Reset EZ Picture Color Temperature DB Advanced Video Reset G Selection ( G or ) resets to the factory settings (default). - Use to quickly reset all the Video menu options to their original factory preset values. 1 2 3 Press the MENU button and then use D / E button to select the VIDEO menu. Press the G button and then use D /E button to select Video Reset. Press the G button to reset the Video menu options to original values. 37 Operation Audio Menu Options Audio Language Audio Language EZ Sound Balance TV Speaker Audio Language EZ Sound Balance TV Speaker G English Spanish French - Other languages may be available if a digital signal is provided by the broadcasting station. 1 2 3 4 Press the MENU button and then use AUDIO menu. D /E button to select the Press the G button and then use D / E button to select Audio Language. Press the G button and then use Spanish, or French. D /E button to select: English, Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. 38 Operation Auto Sound Control (EZ ( - EZ Sound lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the program content. - Normal, Stadium, News, Music and Theater are preset for good sound quality at the factory and are not adjustable. - When you select the Stadium or Theater, the AUDIO menuBalance option is disable and the Balance option is set to 0 automatically. When SRS is On, the Balance option is set to 0 automatically. And when you change the other modes, the balance is restored to the original value set the user. Sound) 1 Press the EZ Sound button repeatedly to select the appropriate sound setup as shown below : Normal, Stadium, News, Music, Theater and User (your own settings) . · You can also adjust EZ SOUND in the AUDIO menu. 2 Press EXIT button to save and return to TV viewing. Manual Sound Control (EZ Sound-User option) Audio Language EZ Sound Balance TV Speaker Normal Stadium News Music Theater User User Treble Bass Front Surround G 50 50 Off G Selection ( G or ) leads you to the detailed setting screen. Press MENU to confirm. - Adjust the sound in your preference and surrounded environment. 1 2 3 4 5 Press the MENU button and then use AUDIO menu. Press the G D /E button to select the button and then use D /E button to select EZ Sound. Press the G button and then use D /E button to select User. Press the G button and then use D / E button to select the desired sound option (Treble, Bass or Front Surround). Press the Press the G G button and then use button and then use D /E D /E button to set the hour. button to set the minutes. For only On Timer function Press the G button and then use D / E button to select the channel at turn-on. Press the G button and then use D / E button to set the sound level at turn-on. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. 7 Sleep Timer Press the TIMER button repeatedly to select the number of minutes. First the Off option appears on the screen, followed by the following sleep timer options: 10, 20, 30, 60, 90, 120, 180, and 240 minutes. When the number of minutes you want is displayed on the screen, press the TIMER button. The timer begins to count down from the number of minutes selected. To check the remaining minutes before the TV turns off, press the TIMER button once. To cancel the Sleep Timer, press the TIMER button repeatedly to select Off. - The Sleep Timer turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. - You can also set up the Sleep Timer in the TIME menu. 1 2 3 4 43 Operation T ime Menu Options continued Auto Off Auto Clock Manual Clock Off Timer On Timer Sleep Timer Auto Off Auto Clock Manual Clock Off Timer On Timer Sleep Timer Auto Off G TV will be automatically turned off, in case of No Signal for 10 minutes. Off On - If the TV is on and there is no input signal, the TV turns off automatically after 10 minutes. 1 2 3 4 Press the MENU button and then use D / E button to select the TIME menu. [. . . ] Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights that vary from stat to state. THIS LIMITED WARRANTY DOES NOT APPLY TO: G G HOW SERVICE IS HANDLED: In Home Service. Please Call the Zenith Interactive Center at 1-877-9ZENITH (1-877-993-6484) to schedule a service appointment. [. . . ]