User manual LG Z52DC2D

[. . . ] This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. [. . . ] - The digital channel signal includes information for the current time provided by the broadcasting station. - Set the clock manually, if the current time is set incorrectly by the auto clock function. 1. Press the G G D /E button to select the TIME menu. button and then use button and then use D /E D /E button to select Auto Clock. Press the G button and then use D / E button to select your viewing area time zone: Eastern, Central, Mountain, Pacific, Alaska, or Hawaii. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Manual Clock Setup - If current time setting is wrong, reset the clock manually. Press the G D /E button to select the TIME menu. button and then use D /E button to select Manual Clock. 3. Press the G button and then use F / G button to select either the year, date, or time option. Once selected, use the D / E button to set the year, date, and time options. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. On/Off Timer Setup On/Off Timer function operates only if the current time has been set. Off-Timer function overrides On-Timer function if they are both set to the same time. The TV must be in standby mode for the On-Timer to work. - If you are viewing a picture with a 16:9 aspect ratio, you can't use the Horizon aspect ratio option. - Horizon aspect ratio is not available for Component 1-2(480p/720p/1080i)/RGB-DTV (480p/720p/1080i)/HDMI/DVI-DTV (720p/1080i) /DTV(720p/1080i) input source. - In RGB-PC/DVI-PC input source, only either 4:3 or 16:9 aspect ratio is available. - Note: If a fixed image is displayed on the screen for a long time, the image may become imprinted on the screen and remain visible. Press the RATIO button repeatedly to select the desired picture format. You can also adjust Aspect Ratio in the OPTION menu. · Set By Program Choose the proper picture proportion to match the source's image. (4:3 4:3, 16:9 16:9) · 4:3 Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio, with gray bars appearing at both the left and right sides. · 16:9 Choose 16:9 when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen. · Horizon Choose Horizon when you want to adjust the picture in a non-linear proportion, that is, more enlarged at both sides, to create a spectacular view. · Zoom 1 Choose Zoom 1 when you want to view the picture without any alteration. [. . . ] Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights that vary from stat to state. THIS LIMITED WARRANTY DOES NOT APPLY TO: G G HOW SERVICE IS HANDLED: In Home Service. Please Call the Zenith Interactive Center at 1-877-9ZENITH (1-877-993-6484) to schedule a service appointment. [. . . ]