User manual LG ZW5000T8

[. . . ] In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 00/96/ EC. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. [. . . ] For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product. This product is manufactured to comply with EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC. Veluwezoom 15, 17 AE Almere, The Netherlands (Tel : +1-06-547-8940) European representative : WARNING: Wiring methods shall be in accordance with the National Electric Code, ANSI/NFPA 70. WARNING: To reduce a risk of fire or electric shock, do not expose this product to rain or moisture. CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. CAUTION: This installation should be made by a qualified service person and should conform to all local codes. CAUTION: To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. 00P-B_C. ATURALI_B_ENG. indd 4/14/08 9:19:1 AM Safety Precautions Do not attempt to disassemble the camera To prevent electric shock, do not remove screws or covers. There are no user serviceable parts inside. Ask a qualified service personnel for servicing. Avoid the camera with direct sunlight Do not aim the camera at bright objects. Never face it with direct sunlight or other extremely bright objects. The camera could be damaged by improper handling or storage. If this camera is mounted on the other places except ceiling, you need an extra bracket for mounting. (not supplied) 9 00P-B_C. ATURALI_B_ENG. indd 9 4/14/08 9:0:1 AM Setup 6-pin Dip Switch Setting This camera has the 6-pin Dip Switch for setting. 4. BLC Backlight compensation eliminates strong background light which makes the camera picture dark such as a spotlight. You can select the mode for adjusting the iris lens. AWB/HOLD AWB (Auto White Balance), HOLD (White Balance Hold). ELC / ALC ELC (Electronic IRIS), ALC (Auto IRIS) The default setting is ALC. FL (Flickerless) Use for removing the flicker of picture. AGC (Auto Gain Control) If the image are too dark, change the maximum value to make the image lighter. The D&N function is activated automatically AGC ON mode. [. . . ] The default setting is ON. 00P-B_C. ATURALI_B_ENG. indd 10 4/14/08 9:0: AM Troubleshooting Check the following guide for the possible cause of a problem before contacting service. The picture is poor Does the Dome Cover have lots of dust on the surface?- Use a dry cloth to clean the camera when it is dirty. [. . . ]