User manual LIEBHERR CNESF 5123

[. . . ] Operating instructions NoFrost combined refrigerator-freezer Page 10 GB 7082 203-00 CN 5123 1110 The appliance contains some reusable materials and should be disposed of properly - not simply with unsorted household refuse. Appliances which are no longer needed must be disposed of in a professional and appropriate way, in accordance with the current local regulations and laws. Disposal notes · Disable the appliance. · Cut through the connecting cable. When disposing of the appliance, ensure that the refrigeration circuit is not damaged to prevent uncontrolled escape of the refrigerant it contains (data on type plate) and oil. - in staff kitchenettes, bed and breakfast establishments, - by guests in country homes, hotels, motels and other forms of accommodation, - in catering and similar services in the wholesale trade. Use the appliance solely as is customary within a domestic environment. [. . . ] - when placing frozen food in the freezer; - when freezing up to approx. 2 kg fresh food daily. By activating the SuperFrost function the temperature in the freezer compartment will drop to the lowest attainable value. Thus food can be rapidly frozen to the core and the quality is preserved. You should not switch on the SuperFrost function: Freezing chart Cooling with fan This is recommended: - in high room temperatures (approx. 30°C or higher), - if the air humidity is high (e. g. during the summer). With the fan function switched on, a uniform temperature distribution will be attained in the refrigerator compartment. To switch on Press the fan button 2 - the LED in the button will come on. The freezing chart represents the frozen food and the time it can be safely stored in months. It will only make ice cubes if the freezer compartment is operating. · Pull out the drawer. · Press the ON/OFF button so that the control lamp comes on. Note: The ice maker can only make ice cubes if the drawer is completely closed. Safety instructions and warnings for the automatic ice maker · The ice maker is designed exclusively to make ice cubes in quantities required by a household. · The water tank must be filled with cold drinking water or sparkling drinking water (mineral water, soda water) only. Important If you do not need any ice cubes, the ice maker can be switched off independently of the freezer compartment. · Press the ON/OFF button for approx. 1 second so that the control lamp goes out. Note: If the ice maker is switched off, the empty drawer can also be used to freeze and store food. To switch off: · The water quality must comply with the drinking water directives of the country in which the appliance is used. · All repairs and work on the ice maker may only be carried out by customer service personnel or other trained personnel. · The first three batches of ice must not be consumed or used. This applies both to using the appliance for the first time and also to using it after it has not been used for a lengthy period of time. Do not fill with any kind of alcoholic drinks or sugary liquids. This will damage the ice maker. During operation, the ice maker produces pumping and injection noises, which cannot be avoided. To make ice cubes After you start the ice maker for the first time it may take up to 24 hours before the first ice cubes are ready. Please note that the first three batches of ice must not be consumed or used. The production capacity depends on the temperature inside the freezer compartment. The lower the temperature, the more ice can be produced over a period of time. Filling the water tank The water for the ice maker is supplied from a water tank in the refrigerator compartment (see "Description of appliance and equipment" - page 10). This must be filled with water before the ice maker is switched on. 1. Pull out the water tank up to the last clip-in position. This makes filling the tank in the appliance easy. [. . . ] When setting up the appliance next to a wall 4, a distance of approx. 50 mm must be provided on the hinge side between the appliance and the wall (for the handle when the door is open). To adapt the height of the appliance to the surrounding furniture a top unit 1 can be added. 5. Remove bottom door. 1 top unit 2 refrigerator-freezer 3 kitchen unit side panel 4 wall 7. Transfer plug. Lever out pressure plates at the front and slide away. [. . . ]