User manual LIEBHERR ECBN 5066 PREMIUMPLUS BIOFRESH NOFROST

[. . . ] • Do not use electrical appliances inside the appliance. • Disconnect the appliance from the mains if any fault occurs. Pull out the plug, switch off or remove the fuse. • When disconnecting the appliance, pull on the plug, not on the cable. • Any repairs and work on the appliance should only be carried out by the customer service department, as unauthor­sed work could prove i highly dangerous for the user. The same applies to changing the mains power cable. [. . . ] The child lock is deactivated. • Exit setup mode by touching the freezer compartment On/Off icon. 18 After the water filter has been changed, the waterdrop symbol on the display must be reset. = Confirm water filter change GB The temperature in the BioFresh drawers may be changed. = Set BioFresh temperature Resetting the drop symbol Setting the BioFresh temperature • Activate setup mode by touching the S ­ uperFrost icon for 5 seconds. • Touch the freezer compartment Down icon until appears in the display. - The display reads • Touch the SuperFrost icon again. - The display reads • The waterdrop symbol disappears. • Exit setup mode by touching the freezer compartment On/Off icon. • Activate setup mode by touching the ­ SuperFrost icon for 5 seconds. • Touch the freezer compartment Down icon until the display. - The display reads • Touch the freezer compartment Up/Down icons and set 6 - 9 to increase the temperature (warmer), 4 - 1 to reduce the temperature. appears in For values b4 - b1, the temperature in the drawers can drop to below 0°C. • Touch the SuperFrost icon at the desired value. With high humidity and low ambient temperature this feature helps to prevent condensation. Lift the bottle holder vertically at the front (1), move backwards (2) and remove. Repositioning the shelves Once the dust filter in the appliance plinth has been cleaned, the dust filter LED in the display must be cancelled. = Confirm dust filter cleaning 1. Hold the shelf underneath with your hand to prevent from tipping down backwards when removing. 3. Pull the shelf towards you until the round cutout of the shelf is in line with the interior light cover. - The energy consumption depends on the installation conditions, e. g. - Keep the time the appliance is open to a minimum. - Ensure that all food is well packed and covered for storage. - First cool warm food to room temperature before storing it. - Defrost frozen food in the refrigerator. - If there is a thick layer of frost in the appliance: defrost the appliance. - Empty and switch off refrigerating unit for longer vacation periods. - Use the vacation function for longer vacation periods. Accumulated dust increases the energy consumption: - Once a year, dust the refrigeration unit together with the metal grille of the heat exchanger at the back of the appliance. 21 The BioFresh compartment enables you to keep food for up to 3 times longer than in normal refrigerators. BioFresh compartment Freezer compartment description The constant temperature of just above 0°C and the adjustable humidity provide the ideal storage conditions for different types of food. The BioFresh compartment satisfies the requirements of a chill compartment to EN ISO 15502. Both drawers can be used for freezing of food or storage of frozen food. If you need the whole upper drawer for freezing or storage, the ice cube bin can be removed. [. . . ] It is very important for servicing purposes. Activating the ice maker vacation state Be sure the upper freezer drawer is completely closed and the ice cube bin is installed correctly. • Touch the freezer compartment Down icon until appears in the display. Removing the freezer drawer containers • Open the refrigerator door. Ice cube bin • Pull out the freezer drawer. • Pull the container upwards by the right and left corners (1). [. . . ]