User manual LIEBHERR EK 1610 COMFORT

[. . . ] Conformity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Saving energy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General safety information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Controls and displays. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] u To deactivate the set-up mode: press On/Off button, freezer compartment Fig. w The temperature is indicated again in the temperature display. 4. 7 Connecting the appliance NOTICE Risk of damage to the electronic control system!u Do not use stand-alone inverters (conversion of d. c. to a. c. / three-phase) or energy saving plugs. WARNING Fire and overheating hazard!u Do not use extension cables or multiple socket outlets. The type of current (alternating current) and voltage at the installation site have to conform with the data on the type plate (see Appliance at a glance). Connect the appliance only with a properly installed socket outlet with earthing contact. The socket outlet must be fused with 10 A or higher. u Plug in the power plug. 5. 2 Child proofing The child-proofing function enables you to make sure that the appliance is not inadvertently switched off by playing children. 5. 2. 1 Setting the child lock u To activate the setting mode: press SuperFrost button Fig. u Briefly press the SuperFrost button Fig. u To switch on: Using the Up setting button, freezer compartment Fig. w The first time the button is pressed, the value set so far is indicated in the refrigerator compartment temperature display. u To change the temperature in 1 °C steps: briefly press the button. u To change the temperature continuously: hold down the button. w The value is displayed flashing during the setting operation. w The actual temperature is displayed about 5 s after the last press of a button. The temperature slowly adjusts to the new value. 5. 4 Temperature alarm The audible alarm sounds if the freezer temperature is not cold enough. The temperature display flashes at the same time. The cause of the temperature being too high may be: - warm fresh food was placed inside - too much warm ambient air flowed in when rearranging and removing food - power failure for some time - the appliance is faulty The audible alarm is automatically silenced and the temperature display stops flashing when the temperature is sufficiently cold again. If the alarm status persists: (see Malfunction). Note Food may be spoilt if the temperature is not cold enough. Do not consume spoiled food. 5. 4. 1 Muting the temperature alarm The audible alarm can be muted. [. . . ] Although the running time is increased as a result, energy is saved. u This is normal in energy-saving models. u The compressor runs for longer in order to rapidly cool the food. u The compressor runs for longer in order to rapidly cool the food. [. . . ]