User manual LIEBHERR EK 2254

[. . . ] - Transfer the hinge pin 9 to the other side. W Remove the plastic cover bl from the door mounting and insert on the other side making sure it fits precisely. W Rotate the hinge 7 by 180° and transfer to the other side. [. . . ] Equalisation height Part no. : [mm] h brown white aluminium _______________________________________________ 16 9733032 9733035 9733050 41 9733033 9733036 9733051 60 9733034 9733037 9733052 Assembly W Unscrew top and bottom decor frame br/bu. Just loosen the decor frames bt at the side and push forwards. W Insert equaliser trims cm at top and/or bottom. W Place decor frames br/bu over panel and screw tight with retaining screws. W Cover screw heads with cover caps cl Equaliser trims for replacement appliances EK/EKB/EG * Depending on model and options 7 Installation instructions Installation information and dimensions W Fig. D: Align the unit with a spirit level and an angle. If necessary, level out by building up from underneath. The shelf and side walls of the unit must be at right-angles to one another. W Fit the refrigerator/freezer in stable kitchen units only. W The following ventilation gaps must be observed: - The depth of the ventilation channel at the rear of the unit must be at least 38 mm. - There must be a ventilation space of at least 200 cm2 underneath and at the top of the unit. The following principle applies: the greater the area the more economically the appliance will run. W Check installation dimensions in accordance with fig. D: appliance height (carcass) a, door height b, recess height c. (mm) a 872 1218 b 887 1233 c 874- 880 1220-1226 110 in. [. . . ] F: - Using a spanner*, vertically align the appliance on the handle side by way of the adjustable foot* du. Pay attention to the following: - The appliance has to be tight-fitting against the side wall at the top on the hinge side!- Align the door so that it is in alignment with the surrounding unit doors by means of the elongated slots in the lower hinge 8. [. . . ]