User manual LIEBHERR G 1223

[. . . ] Table-height freezer Operating instructions 090112 7081998 - 00 G(P)12. . /GX823 . . . 3 Appliance at a glance Contents 1 1. 1 1. 2 1. 3 1. 4 1. 5 2 3 3. 1 3. 2 4 4. 1 4. 2 4. 3 4. 4 4. 5 4. 6 4. 7 5 5. 1 5. 2 5. 3 5. 4 5. 5 5. 6 5. 7 5. 8 5. 9 5. 10 5. 11 6 6. 1 6. 2 6. 3 7 8 8. 1 8. 2 9 Appliance at a glance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Description of appliance and equipment. . . . . . . . . . . . . . . . . . Range of appliance use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] It must be easily accessible so that the appliance can be quickly disconnected from the supply in an emergency. It must be outside the area of the rear of the appliance. The child-proofing function enables you to make sure that the appliance is not inadvertently switched off by playing children. 5. 2. 1 To activate child lock u To activate the setting mode: Press the SuperFrost button Fig. 3 (6) shines and the child lock symbol Fig. u Briefly press the SuperFrost button Fig. 3 (4) to select the child lock function. The -15 °C and -21 °C LEDs shine in the temperature display. u Briefly press the SuperFrost button Fig. The -15 °C and -21 °C LEDs go out. u To deactivate the setting mode: Press the On/Off button -oru Wait for 5 minutes. 3 (6) goes out and the temperature is displayed again in the temperature display. 3 (9) shines. 4. 7 Switching on the appliance u Press the On/Off button Fig. The temperature display and Alarm symbol Fig. 3 (7) flash until the temperature is cold enough. Fig. 3 (1). 5 Control 5. 1 Brightness of the temperature display You can adjust the brightness of the temperature display to the light conditions of the room in which the appliance is installed. 5. 2. 2 To deactivate child lock u To activate the setting mode: Press the SuperFrost button Fig. 3 (6) shines and the child lock symbol Fig. u Briefly press the SuperFrost button Fig. 3 (4) to select the child lock function. The -18 °C LED shines in the temperature display. u Briefly press the SuperFrost button Fig. u To deactivate the setting mode: Press the On/Off button -oru Wait for 5 minutes. 3 (6) goes out and the temperature is displayed again in the temperature display. [. . . ] The inverter is equipped with a diagnostic LED. Speed-controlled* compressors may produce varying running noise due to different speed steps. u The sound is normal. The appliance was opened too frequently or for too long. u Wait until the appliance reaches the required temperature u u u itself. [. . . ]