User manual LIEBHERR GN 1056

[. . . ] Gebrauchsanweisung für Gefriergerät, NoFrost for NoFrost freezer D GB F NL I E P TR Operating instructions Consignes d'utilisation Congélateur NoFrost Gebruiksaanwijzing Istruzione d'uso Congelador NoFrost Congelador NoFrost per congelatore NoFrost voor diepvriesapparaten, NoFrost Instrucciones de manejo Instruções de utilização Kullanim kilavuzu Derin dondurucu NoFrost 7081 880-00 GN 1056 1110 The appliance at a glance 1 Temperature display and setting display Operating and control elements, fig. A1 with nA FrostControl and power failure display with call-up function for highest temperature 2 Temperature buttons: UP = higher, DOWN = lower, recommended setting: -18 °C 3 On/off button 4 SuperFrost button, symbol 7 lit = function activated For fast freezing of large quantities of fresh food. · Press the SuperFrost button 4 briefly so that it lights up. 6 - 24 hours to reach its lowest temperature. [. . . ] W The socket must be fused with a 10 A fuse or higher, it must be away from the rear of the appliance and must be easily accessible. W Do not connect the appliance to the supply with other equipment using a distribution outlet - risk of overheating. W When removing the mains cable from the back of the appliance, remove the cable holder as well so as to avoid vibration noise. The wires in the mains lead are coloured in accordance with the following code: green/yellow = earth, blue = neutral, brown = live. Non-rewireable plugs BS 1363 If this machine or appliance is fitted with a non-rewireable plug, the following information applies: If the socket outlets are not suitable for the plug supplied with this product, it must be cut off and an appropriate plug fitted. - Check the quality of the food and its suitability for consumption in case it has become too warm or even defrosted. - The highest temperature will appear for approx. After that, the actual temperature in the freezer will re-appear. The display can be switched off by pressing the audible warning on/off button. Once the power is re-instated, the appliance will continue to operate at the most recent temperature setting. In set-up mode you can set the child-proof lock and adjust the brightness of the display*: Activating set-up mode: W Press SuperFrost button for approx. 5 secs - the display shows c for child-proof lock. W Select the required function by pressing the Up/Down button: c = child-proof lock or h = brightness. W Now select/acknowledge function by pressing SuperFrost button briefly: · For c = child-proof lock, press the Up/Down button to select c1 = child-proof lock on or c0 = child-proof lock off and acknowledge with the SuperFrost button. When the symbol 6 is lit, the child-proof lock is activated. · For h = brightness, press Up/Down button to select h1= minimum to h5 = maximum brightness and acknowledge with the SuperFrost button. Exit set-up mode: W To exit the set-up mode, press the On/Off button; after 2 mins. the electronic system switches over automatically. - The normal operating mode is activated again. Audible warning signal W Switching on: Press the on/off button 3 so that the temperature display lights up/flashes. - When the appliance is switched on for the first time and while it is still warm, the display will contain dashes until the temperature falls below 0°C. W Switching off: Press the on/off button for approx. two seconds so that the temperature display goes out. [. . . ] If necessary, move the appliance slightly, align by adjusting the adjustable feet, or move bottles and containers apart. These are caused by the refrigerant flowing round the refrigerant circuit. A short clicking sound: This will be heard whenever the refrigeration unit (the motor) switches on or off automatically. Motor noise: This will be slightly louder for a brief period when the refrigeration unit switches on. [. . . ]