User manual LIEBHERR K 4270

[. . . ] Upright refrigerator Operating and installation instructions 121110 7084442 - 01 SKes/Sk/K/Kes 36. . . 42 . . . 6 Appliance at a glance Contents 1 1. 1 1. 2 1. 3 1. 4 1. 5 1. 6 2 3 3. 1 3. 2 4 4. 1 4. 2 4. 3 4. 4 4. 5 4. 6 4. 7 5 5. 1 5. 2 5. 3 5. 4 5. 5 5. 6 5. 7 5. 8 5. 9 5. 10 5. 11 6 6. 1 6. 2 6. 3 7 8 8. 1 8. 2 9 Appliance at a glance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Description of appliance and equipment. . . . . . . . . . . . . . . . . . Range of appliance use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] u Always keep the ventilation openings clear. Always ensure that the appliance is properly ventilated!u Detach the connecting cable from the rear of the appliance, removing the cable holder at the same time because otherwise there will be vibratory noise!u Remove the protective film from the outside of the appliance. * NOTICE* The stainless steel doors are provided with a high-quality surface coating and must not be treated using the accompanying care product. Otherwise the surface coating will be affected. u Wipe the coated door surfaces using a soft, clean cloth only. u Apply a stainless steel cleaner only to the stainless steel side walls evenly, wiping with the grain. Subsequent cleaning becomes easier as a result. u Wipe side walls with a paint finish using a soft, clean cloth only. u Remove the protective film from the decorative trims. * 4. 3 Transporting the appliance CAUTION Risk of injury and danger of damage as a result of incorrect transport!u Transport the appliance in a packed condition. u Do not transport the appliance without assistance. 6 Control u Remove all transit supports. u Dispose of packaging material (see 4. 5) . NOTICE Risk of damage due to condensate!If your appliance is not a Side-by-Side (SBS) appliance: u do not install the appliance directly alongside a further refrigerator/freezer. u Align the appliance so that it stands firmly and on a level by applying the accompanying spanner to the adjustableheight feet (A) and using a spirit level. u Then support the door: Extend the adjustable foot at the turn hinge (B) until it rests on the floor and then make a further 90° turn. It must be easily accessible so that the appliance can be quickly disconnected from the supply in an emergency. u Plug in the power plug. 4. 7 Switching on the appliance u Press On/Off button Fig. w The temperature display indicates the current temperature. w The interior light is on when the door is open. 5 Control 5. 1 Brightness of the temperature display You can adjust the brightness of the temperature display to the light conditions of the room in which the appliance is installed. When a Side-by-Side appliance (S. . . ) is fitted together with a second appliance (as a SBS combination): u Proceed according to the Side-by-Side combined fridgefreezer installation instructions. (Accessories bag of the SBS freezer/appliance with freezer compartment) Note u Clean the appliance (see 6. 1) . [. . . ] 13 (3) off the type plate located inside the appliance on the lefthand side. The sound is produced by air flow noise of the fan. u The sound is normal. Vibratory noise. The appliance is not standing firmly on the floor. As a result, adjoining units or objects are set into vibration by the running refrigeration unit. [. . . ]