User manual LIEBHERR KB 4210 COMFORT BIOFRESH

[. . . ] Description of appliance and equipment. . . . . . . . . . . . . . . . . . External dimensions of the appliance. . . . . . . . . . . . . . . . . . . . . . . Saving energy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HomeDialog. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If your appliance is not a Side-by-Side (SBS) appliance: u do not install the appliance directly alongside a further refrigerator/freezer. u Align the appliance so that it stands firmly and on a level by applying the accompanying spanner to the adjustable-height feet (A) and using a spirit level. u Then support the door: Extend the adjustable foot at the turn hinge (B) until it rests on the floor and then make a further 90° turn. 4. 3 Transporting the appliance CAUTION Risk of injury and danger of damage as a result of incorrect transport!u Transport the appliance in a packed condition. u Do not transport the appliance without assistance. 4. 4 Installing the appliance In the event that the appliance is damaged, contact the supplier immediately before connecting to the mains. The floor at the site must be flat and level. Do not install the appliance in a location where it is exposed to direct radiation of the sun, next to a cooker, heater and similar. Always install the appliance directly against the wall. Do not install the appliance without assistance. Standard EN 378 specifies that the room in which you install your appliance must have a volume of 1 m 2 per 8 g of R 600a refrigerant used in the appliance. If the room in which the appliance is installed is too small, a flammable gas-air mixture may form in the event of a leakage in the refrigeration circuit. The socket outlet must be fused with 10 A or higher. It must be easily accessible so that the appliance can be quickly disconnected from the supply in an emergency. u Plug in the power plug. w The child lock symbol Fig. When c0 is indicated in the display: u to deactivate the child lock, briefly press the SuperCool button Fig. u To deactivate the set-up mode: press On/Off button -oru Wait for 5 minutes. w The temperature is indicated again in the temperature display. Fig. 3 (3). 4. 7 Switching on the appliance u Press On/Off button Fig. w The temperature display indicates the current temperature. w The interior light is on when the door is open. 5. 3 Door alarm If the door is open longer then 60 s, the audible alarm sounds. The audible alarm is automatically silenced when the door is closed. 5 Control 5. 1 Brightness of the temperature display You can adjust the brightness of the temperature display to the light conditions of the room in which the appliance is installed. 5. 3. 1 Muting the door alarm The audible alarm can be muted when the door is open. The sound switch-off function is active as long as the door is left open. [. . . ] It is briefly a little louder when the refrigeration unit (the motor) switches on. The refrigeration increases automatically when fresh food has just been placed in the appliance or the door has been left open for a while. The sound is produced by air flow noise of the fan. The appliance is not standing firmly on the floor. [. . . ]