User manual LIEBHERR KBGW 3864 PREMIUM BIOFRESH

[. . . ] Conformity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . External dimensions of the appliance. . . . . . . . . . . . . . . . . . . . . . . Saving energy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HomeDialog. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 12 (4), the distance between appliance and wall has to be at least 40 mm. 4. 5 Disposing of packaging WARNING Danger of suffocation due to packing material and plastic film!u Do not allow children to play with packing material. - The packaging is made of recyclable materials: corrugated board/cardboard expanded polystyrene parts polythene bags and sheets polypropylene straps nailed wooden frame with polyethylene panel* u Take the packaging material to an official collecting point. 7 Control 4. 6 Connecting the appliance NOTICE Risk of damage to the electronic control system!u Do not use stand-alone inverters (conversion of d. c. to a. c. / three-phase) or energy saving plugs. 5. 2 Child proofing The child-proofing function enables you to make sure that the appliance is not inadvertently switched off by playing children. 5. 2. 1 Setting the child lock function u To activate the setting mode: press SuperCool button Fig. u Briefly press theSuperCool button Fig. When c1 is indicated in the display: u to activate the child lock, briefly press the SuperCool button Fig. 3 (2). WARNING Fire and overheating hazard!u Do not use extension cables or multiple socket outlets. The type of current (alternating current) and voltage at the installation site have to conform with the data on the type plate (see Appliance at a glance). Connect the appliance only with a properly installed socket outlet with earthing contact. The socket outlet must be fused with 10 A or higher. For appliances from 1216 mm high: u Use the front area of the refrigerator compartment floor only for briefly putting down cooled products, e. g. However do not leave cooled products there otherwise they may be pushed back or tipped over when the door is closed. Fig. -oru Wait for 5 minutes. w The brightness is adjusted to the new value. u To deactivate the setting mode: press the On/Off button w The temperature is indicated again in the temperature display. 8 Control u Do not store food too close together to enable good air circulation. u To safeguard bottles from tipping over: move the bottle holder. At the base of the refrigerator compartment, the integrated bottle shelf or alternatively the glass shelf can be used: u To use the bottle shelf: store the glass shelf compactly under the bottle shelf. u Place the bottles with the base pointing backwards facing the rear wall. If the bottles project beyond the bottle shelf: u set the lower door rack one position higher. w The food does not freeze onto the rear wall. 5. 4. 5 Using the sectioned shelf u The glass shelf with stop face (2) has to be at the back. Fig. 13 5. 4. 6 Moving the storage rack u Remove storage rack according to illustration. 5. 4. 2 Setting the temperature The temperature can be set from 9 °C to 3 °C, the recommended temperature is 5 °C. An average temperature of about ­18 °C is reached in the freezer compartment. [. . . ] In this case you will have to be charged for the costs incurred, even during the warranty period. You may be able to rectify the following faults yourself: Appliance does not work. The power plug is not properly inserted in the wall socket. The fuse of the wall socket is not in order. [. . . ]