User manual LIEBHERR WTB 4212 VINOTHEK

[. . . ] - Avoid positioning the appliance in direct sunlight or near cookers, radiators or similar sources of heat. - The energy consumption depends on the installation conditions, e. g. - Keep the time the appliance is open to a minimum. Accumulated dust increases the energy consumption: - Once a year, dust the refrigeration unit together with the metal grid of the heat exchanger at the back of the appliance. Saving energy Description of the appliance Operating and control elements Interior light Note Fit the short grid shelf in the top position only. Grid shelves Type plate Activated charcoal filter Adjustable-height feet 10 • To prevent injury or damage to the unit, the appliance should be unpacked and set up by two people. Safety instructions and warnings • In the event that the appliance is damaged on delivery, contact the supplier immediately before connecting to the mains. [. . . ] The position of the type plate is shown in the section entitled Description of the appliance. The socket must be properly earthed and protected by a fuse. The tripping current of the fuse must be between 10 A and 16 A. The socket must not be situated behind the appliance and must be easily accessible. Do not connect the appliance using an extension cable or extension socket. Do not use stand-alone inverters (conversion of direct current to alternating/three-phase current) or energy-saving plugs. Risk of damage to the electronic control system! Electrical connection 11 Operating and control elements Insert the grid shelves into the appliance as shown in the illustration. Insert the short grid shelf with a depth of 450 mm in the topmost position (see section entitled Description of the appliance). With this multi-temperature wine cabinet, you can cool wines to the perfect temperature for drinking. Multi-temperature wine cooling 1 pper compartment temperature display U 2 ower compartment temperature display L 3 pper compartment temperature setting buttons U 4 ower compartment temperature setting buttons L 5 n/Off button O 6 udible warning On/Off button A 7 hild lock activated symbol C 8 nterior light On/Off button I Switching the appliance on and off The lowest compartment has the lowest temperature. The temperature rises steadily up to the top compartment . Store the different types of wine in the various compartments. If F1 or F3 appears in the display, the appliance has suffered a fault. In this case, contact the customer service department. 12 In set-up mode you can set the child lock and adjust the brightness of the display. The child lock is designed to protect the appliance from being switched off accidentally. Additional functions GB Adjusting the display brightness Press for 5 seconds. Display = Activating the child lock Press for 5 seconds. Display = Display = Display = Display = Display = Use buttons and to select the desired setting. Display = h1 = minimum brightness h5 = maximum brightness Display = Display = Display = Deactivating the child lock Press for 5 seconds. Display = The adjusted brightness will be activated after one minute. Note If a button is pressed, the display lights up for one minute at maximum brightness. Display = Display = Demo mode can be activated for presenting the appliance at exhibitions or in salesrooms as though in normal operating mode. If this mode is activated by accident, it can be deactivated as detailed below. When in this mode, the cooling circuit is switched off! Demo mode Display = Display = Display = Display = The refrigeration unit switches on. The appliance is now in normal operating mode. 13 The interior light will always switch on when the appliance door is opened. Press the Light button if you want the interior light to be on even when the door is closed. Interior light Humidifier The right humidity is vitally important for the proper storage of wine. [. . . ] – Is the appliance set up too close to a heat source?If none of the above causes apply and you cannot rectify the fault yourself, contact the nearest customer service department stating the type designation 1, service number 2and appliance number 3as indicated on the type plate. • When inserting the mains plug, the refrigeration unit does not switch on, but a value is shown in the temperature display. Deactivate demo mode as described in the section entitled Additional functions - Demo mode. 3 5 5. Transfer plug. 6. Transfer door handle and plugs to the other side. The position of the type plate is shown in the section entitled Description of the appliance. 6 16 GB 9 7. Unscrew the pin. [. . . ]