User manual LIFT-MASTER 71 2954028

[. . . ] COURTESY LIGHT MODIFICATION STANDARD OPERATORS 71-2954028 APPLICATION REQUIREMENTS: This wiring modification is available to models T, GT, APT, J, H, GH, SD and GSD standard door operator with 115VAC line voltage. FUNCTIONS: Provides a light socket on the operator control enclosure. [. . . ] b) Black wire from #53 of one contact block to #53 of other contact block. c) Black wire from #54 of one contact block to #54 of other contact block. d) Black wire from #54 of the open-direction contact block to terminal (A) of light delay module. e) Black wire from #53 of the close-direction contact block to the black wire of the lightbulb-socket (connect with wire nut). f) Red wire from terminal (C) of light delay module to the white wire of the lightbulb-socket (connect with wire nut). g) White wire from terminal (B) of the light delay module to 115V-NEUTRAL (terminal L2 on 115V operators). Do not exceed 100 total watts with your Bulb(s). 1. Before Proceeding be sure the Auxiliary Contact blocks supplied in this kit will fit your contactor. CAUTION WARNING 2. Once you have determined that the contactor blocks are correct install one on each half of the reversing contactor. The blocks slide on from the odd numbered side to the even numbered side. [. . . ] Also install the light socket (see figure 6). If the light socket is to be installed on the control box, knock out one of the knockouts and secure the socket with a nut on each side of the sheet metal. FIGURE 1- Mounting location of light-delay module for Models T, GT, APT, SD and GSD FIGURE 2- Mounting location of light-delay module for Models J, H and GH 2 FIGURE 3- Detail on auxiliary contact block connections: OPEN DIRECTION 61 62 BLACK LIGHT-DELAY TERMINAL (A) BLACK JUMPER AUXILIARY CONTACT BLOCKS 61 62 BLACK JUMPER BLACK 115V-HOT 53 54 BLACK BLACK WIRE OF LIGHT (CONNECT BY WIRE-NUT) 53 54 CLOSED DIRECTION FIGURE 4- Courtesy-light modification wiring diagram: AUXILIARY CONTACT BLOCKS OP (HOT) BK WH L M 115V FOR LIGHT P 53 53 54 N 54 Q O A C LIGHT DELAY CL (NEUT) R B KEY TO WIRES: LETTER L M N O P Q R COLOR BLACK BLACK BLACK BLACK BLACK RED WHITE LENGTH 14" 8" 8" 8" 8" 14" 9" TYPE FORK-FORK FORK-FORK FORK-FORK FORK-FORK FORK-STRIPPED FORK-STRIPPED FORK-FORK 3 FIGURE 5- Light-delay module terminals: LIGHT DELAY ASSEMBLY #76-18686 C B A FIGURE 6- Detail on light-bulb assembly: TO TERMINAL C OF LIGHT DELAY MODULE WH BULB 100 WATTS MAXIMUM BK EXTRA NUT 27-12015 SOCKET WITH NUT TO TERMINAL #53 OF THE CLOSED DIRECTION AUXILIARY CONTACT BLOCK 01-12014D © 1998, The Chamberlain Group, Inc. [. . . ]