User manual LIFT-MASTER 71 2954028M

[. . . ] COURTESY LIGHT MODIFICATION MEDIUM DUTY OPERATORS APPLICATION REQUIREMENTS: This modification is available to models MT and MJ/MH Medium Duty door operator with 115VAC line voltage. [. . . ] PART NUMBER 76-18741 27-10199 27-12015 80-362-1 82-PX08-10T 84-LH-08 95-YE15-69 96-BK09-16 96-WH09-16 96-RD15-66 DESCRIPTION LIGHT DELAY ASSY. , MEDIUM DUTY WIRE TIE LIGHT SOCKET BLUE WIRE NUT SCREW, #8-32 X 5/8" LONG, PAN HEAD, PHILLIPS LOCKNUT, #8-32 WIRE, YELLOW, 15" LONG, 1/4" FORK X 1/4" FASTON WIRE, BLACK, 9" LONG, STRIP X 1/4" FORK WIRE, WHITE, 9" LONG, STRIP X 1/4" FORK WIRE, RED, 15" LONG, 1/4" FORK X 1/4" FORK QUANTITY 1 5 1 2 2 2 1 1 1 1 INSTALLATION INSTRUCTIONS FIGURE 1: HOLE LOCATION TO AVOID SERIOUS PERSONAL INJURY OR DEATH FROM ELECTROCUTION, DISCONNECT ELECTRIC POWER TO OPERATOR BEFORE INSTALLING LIGHT DELAY KIT. RADIO BLOCK SIDE STEP 1: INSTALL LIGHT DELAY ASSEMBLY 1. Locate two holes on inside of electrical box on the radio block side. NOTE: If holes don't exist, add holes using a #10 drill, . 193 DIA. Secure delay module assembly in place with (2) #8-32 pan head screws and lock nuts supplied (Refer to figure 2 for additional reference). FIGURE 2: MODULE LOCATION COMPONENTS NOT SHOWN FOR EASE OF VIEWING INSTALLATION INSTRUCTIONS CONT'D STEP 2: WIRING DELAY ASSEMBLY 1. Connect a new yellow wire from (A) on the light delay to the spare terminal on the capacitor. Connect a new red wire from terminal (B) on the light delay to L1 (115V-HOT) on the terminal block. Connect a new black wire from terminal (C) on the light delay to one of the wire nuts provided. [. . . ] B A TO AVOID SERIOUS PERSONAL INJURY OR DEATH FROM ELECTROCUTION, DISCONNECT ELECTRIC POWER TO OPERATOR BEFORE INSTALLING LIGHT DELAY KIT. FIGURE 3: TERMINAL CALLOUT LIGHT DELAY ASSEMBLY #76-18741 NOTE: Delay module shown straightened for ease of viewing. FIGURE 4: WIRING 01-12157C © 2000, The Chamberlain Group, Inc. [. . . ]