User manual LINCOLN NAVIGATOR 2005

[. . . ] Table of Contents Introduction Instrument Cluster Warning and control lights Gauges 4 10 10 13 Entertainment Systems AM/FM stereo cassette with CD AM/FM stereo with in-dash six CD Rear seat controls Rear seat entertainment system Navigation system 16 16 21 35 40 53 Climate Controls Automatic temperature control Rear passenger climate control Rear window defroster 117 119 123 124 Lights Headlamps Turn signal control Bulb replacement 125 125 128 130 Driver Controls Windshield wiper/washer control Power windows Mirrors Speed control Message center 138 138 146 149 153 163 Locks and Security Keys Locks 180 180 180 1 Table of Contents Seating and Safety Restraints Seating Safety restraints Air bags Child restraints 196 196 210 223 231 Tires, Wheels and Loading Tire Information Tire Inflation Changing tires Wheel lug nut torque Tire Pressure Monitoring System (TPMS) Vehicle loading Trailer towing Recreational towing 244 247 248 252 260 269 274 281 288 Driving Starting Brakes Air suspension Transmission operation 289 289 293 297 302 Roadside Emergencies Getting roadside assistance Hazard flasher switch Fuel pump shut-off switch Fuses and relays Jump starting Wrecker towing 320 320 321 321 322 333 338 Customer Assistance Reporting safety defects (U. S. only) 340 348 Cleaning 349 2 Table of Contents Maintenance and Specifications Engine compartment Engine oil Battery Engine Coolant Fuel information Air filter(s) Part numbers Refill capacities Lubricant specifications 355 357 358 362 364 370 382 383 384 386 Accessories Index 393 395 All rights reserved. Reproduction by any means, electronic or mechanical including photocopying, recording or by any information storage and retrieval system or translation in whole or part is not permitted without written authorization from Ford Motor Company. Ford may change the contents without notice and without incurring obligation. [. . . ] Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) until you hear a snap and feel it latch. Make sure the tongue is securely fastened in the buckle. To unfasten, push the release button and remove the tongue from the buckle. · Front and rear seats All safety restraints in the vehicle are combination lap and shoulder belts. All of the passenger combination lap and shoulder belts have two types of locking modes described below: Vehicle sensitive mode This is the normal retractor mode, which allows free shoulder belt length adjustment to your movements and locking in response to vehicle 214 Seating and Safety Restraints movement. For example, if the driver brakes suddenly or turns a corner sharply, or the vehicle receives an impact of approximately 5 mph (8 km/h) or more, the combination safety belts will lock to help reduce forward movement of the driver and passengers. Automatic locking mode In this mode, the shoulder belt is pre-locked. The belt will still retract to remove any slack in the shoulder belt. The automatic locking mode is not available on the driver safety belt. When to use the automatic locking mode · Anytime a child safety seat (except a booster) is installed in the vehicle. Children 12 years old and under should be properly restrained in the rear seat whenever possible. Refer to Safety restraints for children or Safety seats for children later in this chapter. How to use the automatic locking mode 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder portion and pull downward until the entire belt is pulled out. 3. As the belt retracts, you will hear a clicking sound. This indicates the safety belt is now in the automatic locking mode. 215 Seating and Safety Restraints How to disengage the automatic locking mode Unbuckle the combination lap and shoulder belt and allow it to retract completely to disengage the automatic locking mode and return to the vehicle sensitive (emergency) locking mode. After any vehicle collision, the combination lap and shoulder belt system at all passenger seating positions must be checked by a qualified technician to verify that the "automatic locking retractor" feature for child seats is still functioning properly, in addition to other checks for proper seat belt system function. BELT AND RETRACTOR ASSEMBLY MUST BE REPLACED if the safety belt assembly "automatic locking retractor" feature or any other safety belt function is not operating properly. In addition, all safety belts should be checked for proper function. Failure to replace the belt and retractor assembly could increase the risk of injury in collisions. [. . . ] Brake type and gross vehicle weight rating (GVWR) 3. Model year 391 Maintenance and Specifications 7. Production sequence number Engine number The engine number (the last eight numbers of the vehicle identification number) is stamped on the engine block and transmission. Transmission/Transaxle code designations You can find a transmission/transaxle code on the vehicle certification label. [. . . ]