User manual LINE 6 FLOOR POD PLUS REV B

[. . . ] ® Pilot's Guide Manuel de pilotage Pilotenhandbuch Pilotenhandboek Manual del Piloto An in-depth exploration of the technologies and pulsing tonal pleasures of Floor POD Plus. Electrophonic Limited Edition available @ www. line6. com/manuals 40-00-0116 Rev B The serial number can be found on the bottom of your Floor POD Plus. It's the number that begins with "(21)". Please note it here for future reference: SERIAL NO: WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CAUTION: To reduce the risk of fire or electric shock, do not remove screws. Refer servicing to qualified service personnel. CAUTION: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of FCC Rules. [. . . ] One of the biggest differences here is that the tone controls are located after the preamp tubes. We worked with a 1990 JCM 800 with Master Volume to develop this model. Incidentally, some versions of JCM800s get their distortion from clipping a diode. The amp we modeled uses a tube for distortion. This is the metal sound Marshall made famous. Although not many people play Marshalls clean, it's a great tone; so you should also be sure to check out this model with a low Drive setting, too. Of course, you can always pump up the drive and rage. . . . Based on* the Clean Channel of the Dumble® Overdrive Special. The Dumble® Overdrive Special is one of those incredibly expensive, custom amps that most people never get a chance to actually get close to in this lifetime. Each incarnation of the Dumble® magic is a little bit different, because each of these amps is hand built for a specific customer, and voiced to match their playing and desires. With that in mind, we based this Amp Model on the analysis of several different Dumble® Overdrive Specials. Despite this tuning to the individual owner, these amplifiers tend to have a number of features in common; the clean channel is very sensitive to attack and dynamically responsive, and the drive channel has a thick, liquid, singing sustain that doesn't lose string definition when driven hard. Floor POD Plus's tone controls on this Amp Model are quite subtle, like those of the Dumble® itself. * All product names are trademarks of their respective owners, which are in no way associated or affiliated with Line 6. These product names, descriptions and images are provided for the sole purpose of identifying the specific products that were studied during Line 6's sound model development. MESA/BOOGIE® is a registered trademark of Mesa/Boogie, Ltd. MARSHALL® is a registered trademark of Marshall Amplification Plc. DUMBLE® is a registered trademark of Howard Alexander Dumble. Modeled Amps & Cabs TreadPlate RED: "TreadPlate". Based on* a 1994 Mesa/Boogie® Dual Rectifier® Tremoverb. You can use this Amp Model to get that tight, high gain sound used by bands like Dream Theater or Metallica. Mesa/Boogie® made their mark in the late 70's and early 80's by adding master volumes and more gain stages to amps with Fender®-style circuitry. You can hear the Fender® heritage but with more "punch" in the mids. The Dual Rectifier's tone controls are post-distortion and, as with the tone sections of most of the amps we based our models on, the individual controls interact with each other and with the Drive. [. . . ] If the light is lit, now you're sharp. When all three are lit up, you're in tune. To exit tuner mode, press the Save or Manual button or the Tap footswitch. # b # b Tuner Reference Frequency When in Tuner Mode, you can change the tuner reference frequency by using the Bank Up/Down footswitches. By default, the unit has a tuner reference frequency of A440, but it can be adjusted from A436 to A445. [. . . ]