User manual LINKSYS AE6000

[. . . ] For first-time installation, follow the steps on the CD folder. to configure advanced settings , use the convenient , browser-based utility. Wireless  (Blue)  The Wireless LED lights up when there is a wireless connection. The LED flashes when the bridge is actively sending or receiving data over the wireless network. [. . . ] Video Use Aggregation  This option defines whether or not the Media Access Control (MAC) layer will set up an Add Block Acknowledgement (ADDBA) session. Accept Aggregation  This option defines whether or not the MAC layer will accept an ADDBA request. Number of Packets in Aggregation  This option defines the maximum number of packets (sub-frames) in the aggregate. Aggregation Size  This option defines the maximum size of the aggregate (in bytes). Timeout Internal  This option defines the timeout period in which the aggregate should be closed with a “closing condition” before it is closed by the timer. Size of Packet in Aggregation  This option defines the minimum size (in bytes) of packets to be accumulated in the aggregate. ADDBA Timeout  This option defines the duration after which the ADDBA setup is terminated, if there are no frame exchanges within this duration by the Block Acknowledgement (ACK) agreement. The default is 0, which disables the timeout. Aggregation Window Size  This option defines the maximum number of packets transmitted without getting ACKs. Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes. Advanced Configuration ADDBA Timeout  This option defines the duration after which the ADDBA setup is terminated, if there are no frame exchanges within this duration by the Block Acknowledgement (ACK) agreement. The RTS/CTS option provides better coverage but lower throughputs when compared to CTS2Self, because the RTS/CTS option includes acknowledgement from the receiving device. To use the RTS/CTS option, keep the default, RTS/ CTS. The None option may cause collisions between HT and legacy packets. Percentage of maximal transmit power  This option sets the percentage of maximal transmit power relative to the regulatory domain restrictions. For example, if the regulatory domain restriction allows transmissions of up to 20 dB, then setting the percentage at 50% allows maximal transmit power of 10 dB. Select the percentage you want to use: 12%, 25%, 50%, or 100%. 1Q mapping from the IP DSCP/TOS field to WMM priorities (Background, Best Effects, Video, Voice). Re-establish Ethernet connection when initiating wireless connection  To trigger DHCP discovery from the device that resides behind the bridge, the bridge will reset the Ethernet link between the bridge and the device every time a wireless connection is established. Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes. Advanced Configuration Administration > Management Use this screen to manage specific bridge functions: access to the web‑based utility, backup of the configuration file, and reboot. Management Bridge Access Use a password to protect access to the browser-based utility. [. . . ] Re-enter to confirm (Skriv inn på nytt for å bekrefte)  Skriv inn passordet på nytt for å bekrefte det. Behold standardinnstillingen, som er Enabled (Aktivert), hvis du vil tillate trådløs tilgang til det webbaserte verktøyet for broen, eller velg Disabled (Deaktivert) for å blokkere trådløs tilgang til verktøyet. Klikk på Save Settings (Lagre innstillinger) for å ta i bruk endringene, eller klikk på Cancel Changes (Forkast endringer) for å forkaste endringene. Upgrade Firmware (Oppgrader fastvare) Please select a file to upgrade the firmware (Velg en fil for å oppgradere fastvaren)  Klikk på Browse (Bla gjennom), og velg filen med fastvareoppgraderingen. [. . . ]