User manual LINKSYS EFG80

[. . . ] Instant GigaDriveTM Series EtherFast® Network Attached Storage with 80 GB Hard Drive + PrintServer Use this guide to install: EFG80 User Guide COPYRIGHT & TRADEMARKS Copyright © 2002 Linksys, All Rights Reserved. Instant EtherFast and Instant GigaDrive are trademarks of Linksys. EtherFast is a registered trademark of Linksys. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation. [. . . ] The Network Mask setting must match the other devices on your network. It is set, by default, to 255. 255. 255. 0. If you have a router on your network enter its IP Address in the Default Gateway field. DHCP Server The Instant GigaDriveTM can serve as your network's DHCP server if no other device is funtioning as a DHCP server on your network. If you wish to use the Instant GigaDrive as a DHCP server, click the box next to Enable DHCP Server function. Then, enter in the range of IP Addresses you wish to assign on your network. The first three Start and Finish fields must match the Instant GigaDrive's IP Address with the final fields ranging from 2-250. DNS Server The DNS Server function translates Internet addresses to IP Addresses. Enter the same IP Addresses as on your network, or recommended by your ISP. You must complete att least one DNS Server entry if using the "E-Mail Alerts" feature. Otherwise, the DNS entries may be left blank. When you complete multiple fields, the first available server will be used. Administration Tab - System Figure 5-6 From the System screen, you will be able to change some of the Instant GigaDrive's basic settings, such as identification, time settings, and WINS Server. While these changes are being made, you can click the Save button to save these changes, or Cancel to clear all changes. To reset the Instant GigaDrive's default settings, click the Restore Default Config button. To get further information about anything on this screen, click the Help button. 20 21 Instant GigaDriveTMSeries Etherfast Network Attached Storage Administration Tab - Users Figure 5-7 The Users screen allows you to manage the Users that are on the GigaDrive Server. Users can be members of many user Groups. Existing Users The user list shows all existing users. The details of the selected user are displayed in the "Properties" area. Properties · Click on the Groups Button to view and/or modify the Group that the selected user is in. (See Figure 5-9. ) Select the items in the right-hand list that you want to give access to the item in the left-hand list. Click on the left-pointing arrows and then the items will appear in the left-hand list. · Click on the Delete Button to delete the selected user. When deleting a user, you have the option of deleting the Group and Share with the same name as the user (if they exist). 22 Figure 5-8 Enter the User Name in the Name field. [. . . ] Ask the GigaDrive Administrator to grant you access. When using the Web interface, some of the data will not fit on the screen, and there is no scroll bar. · You are likely using extra-large fonts in your Browser or in Windows. To change your browser's font size, select View from your web-browser's menu, and change the font size there. [. . . ]