User manual LINKSYS EG1032

[. . . ] Instant Gigabit Series Instant Gigabit Network Adapter Use this Guide to install the following products: EG1032 (32-bit PCI Card) EG1064 (64-bit PCI Card) User Guide COPYRIGHT & TRADEMARKS Copyright © 2001 Linksys, All Rights Reserved. Instant Gigabit is a trademark of Linksys. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks and brand names are the property of their respective proprietors. [. . . ] Click on Start, Settings, then Control Panel. In the Primary Logon Box, choose Client for NetWare Networks. Under the The following network components are installed box, highlight Client for NetWare Networks and click on the Properties button. The Client for NetWare Networks Properties window appears. Under the General tab, enter the name of your network's Preferred Server. Assign the First Network Drive Letter; the default is F. Make sure the Enable logon script processing is checked. Make sure the Share-level access control option is selected; do not select User-level access control. When you're done, click OK to restart your computer. The NetWare portion of your Windows setup is complete. Starting Over in Windows 95, 98, or Millennium If you experience installation difficulties, you may need to re-install all of the Windows networking components from scratch. The instructions below explain how to give your PC a clean sweep so that you can retry the Instant Gigabit Network Adapter software installation. At the desktop click on the Start Button, highlight Settings, click on Control Panel. Double-click on the Network Icon. Note: The screen shot above, and the ones on the next three pages, are examples only. They may differ from system to system. 43 44 Instant Gigabit Series Instant Gigabit Network Adapter (EG1032/EG1064) 3. If the Configuration box has a component called Dial-Up Adapter, skip forward to step 5. If it doesn't, continue with step 4. Remove any instance of the name Linksys in the box. This includes IPX/SPX. . . Linksys, NetBEUI. . . Linksys, and TCP/IP. . . Linksys. Also remove Client for Microsoft Networks, Client for NetWare Networks, and File and Printer Sharing for Microsoft Networks. 5. For PCs with Dial-Up Networking and/or an AOL adapter, remove any instance of the name Linksys, all IPX/SPX protocols, all NetBEUI, all Clients, and File and Printer Sharing for Microsoft Networks. Do not remove Dial-Up Adapter, AOL Adapter, TCP/IP-Compatible Protocol-AOL Adapter or TCP/IP-Compatible Protocol-Dial-Up Adapter. In some cases, removing one of these components may in turn automatically remove other components as well. If this happens, skip ahead to step 6. 6. [. . . ] URLs are typed into the browser to access Web pages, and URLs are embedded within the pages themselves to provide the hypertext links to other pages. UTP - Unshielded twisted pair is the most common kind of copper telephone wiring. Twisted pair is the ordinary copper wire that connects home and many business computers to the telephone company. To reduce crosstalk or electromagnetic induction between pairs of wires, two insulated copper wires are twisted around each other. [. . . ]