User manual LINKSYS EG24M

[. . . ] EtherFast® II Series 10/100 Managed 24-Port GigaSwitch Use this guide to install: Linksys EtherFast® II 10/100 Managed 24-Port GigaSwitch (EG24M) User Guide COPYRIGHT & TRADEMARKS Copyright © 2000 Linksys, All Rights Reserved. EtherFast is a registered trademark of Linksys. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks and brand names are the property of their respective proprietors. [. . . ] From the L2 Switching DataBase screen, highlight Port Perspective and press the Enter key. The Port Perspective screen will appear. Scrolling Through MAC Addresses Use the following procedure to scroll through the list of active MAC addresses corresponding to the selected port: 1. If the MAC Addresses screen is not the current screen, press the Tab key until it appears. To view per-port VLAN activities, highlight Per Port VLAN Activities, then press the Enter key. To view per-port statistics, highlight Per Port Statistics, then press the Enter key. Per Port VLAN Activities If you select Per Port VLAN Activities from the Port Perspective screen, a screen similar to the following Per Port VLAN Activities screen appears. Use the Up Arrow and Down Arrow keys to scroll through the list of active MAC addresses for the selected port. To search for a MAC address, press the "S" key. When the search prompt appears, enter a MAC address in the Enter MAC Addr to Search screen and press the Enter key. If the address is found, it will be highlighted in the Port MAC Addresses screen. To obtain additional information about a particular MAC address, scroll to the address in the Port MAC Address screen and press the Enter key. A screen similar to the following will appear, showing detailed information about the selected MAC address. 1. Use the Up Arrow and Down Arrow keys to highlight the desired port number and view the corresponding VLAN activities. A screen similar to the one on the next page will appear, along with a list of the MAC addresses for the selected VLAN and the corresponding VLAN memberships. 40 41 Linksys EtherFast® II Series 10/100 Managed 24-Port GigaSwitch Per Port Statistics If you select Per Port Statistics from the Port Perspective screen, a screen similar to the following Per Port VLAN Activities will appear. 5. After reviewing this information, press the Esc key until you return to the desired screen. IP Networking 1. To reset counters for all ports, press the "R" key. When the following screen appears, highlight Yes. Press Enter to reset the counters or highlight No and press Enter to not reset them. If you select IP Networking from the Advanced Management screen, the IP Networking screen will appear. 2. To view statistics for a port, use the Up Arrow and Down Arrow keys to highlight the desired port. A screen similar to the following will appear, showing the statistics for the port you selected. From the IP Networking screen, you can: · View or change IP and RIP Settings. [. . . ] S. , most cables use a square SC connector that slides and locks into place when plugged into a port or connected to another cable. In Europe, the round ST connector is more prevalent. 78 79 Linksys EtherFast® II Series 10/100 Managed 24-Port GigaSwitch Twisted-Pair Cabling There are different grades, or categories, of twisted-pair cabling. Category 5 is the most reliable and is highly recommended. Straight-through cables are used for connecting computers to a hub. [. . . ]