User manual LINKSYS HPN200SK

[. . . ] HomeLink® Series Phoneline10M Network Use this guide to install these Linksys products: HPN200 HomeLink® Phoneline 10M Network Card HPN200SK HomeLink® Phoneline 10M Network In a Box User Guide COPYRIGHT & TRADEMARKS Copyright © 2001 Linksys, All Rights Reserved. Instant Broadband is a registered trademark of Linksys. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks and brand names are the property of their respective proprietors. [. . . ] Click on Sharing, followed by the Sharing tab. When you're done, click on the Apply button, followed by OK. · You can disable drives in the same way. Right-click on the drive you want to stop sharing. Click on Sharing, followed by the Sharing tab. When you're done, click on the Apply button, followed by OK. In Network Neighborhood, you can only see computers running the same operating system as you. For example, if you are running Windows 95, you can only see other Windows 95 computers and not any computer running Windows 98. · Click Start, Find, then Computer and type the name of any other computer in the window that comes up. · Make sure that you are using the same protocols and workgroup names on the 95 and 98 computers. To do this, click on Start, Settings, Control Panel, then double-click on the Network icon. Click on the Configuration tab, then click on the Identification tab for Workgroup settings. If any protocols are missing, add any needed protocol(s) using 27 Common Questions and Answers Common Question and Answers 1. Windows doesn't detect new hardware with the HomeLink Card hardware installed, or it continues to detect the card each time I restart the PC. · You might not have inserted the PCI card correctly or securely into the appropriate slot of your computer. Check that the card is securely inserted into the appropriate slot. · The motherboard in your system might not be Plug-and-Play compatible, your PC's Plug-and-Play settings may not be enabled, or the motherboard may have Plug-and-Play options not supported by Windows. If you are not sure, contact your PC's manufacturer. Windows can't locate the driver for the HomeLink Card device. · You may have inserted the wrong CD-ROM into your PC's drive. · The CD-ROM may be defective or files may be missing, or you may be pointing Windows to the wrong directory or drive. · The path in the "Copy File From. . . " bar may be incorrect. [. . . ] Static IP Address - A permanent IP address that is assigned to a node in a TCP/IP network. Static Routing - Forwarding data in a network via a fixed path. Static routing cannot adjust to changing line conditions as can dynamic routing. Subnet Mask - The method used for splitting IP networks into a series of subgroups, or subnets. [. . . ]