User manual LINKSYS PAP2

[. . . ] ® A Division of Cisco Systems, Inc. Phone Adapter with 2 Ports for Voice-over-IP WIRED Installation and Troubleshooting Guide Model No. PAP2 Phone Adapter with 2 Ports for Voice-over-IP Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. Copyright © 2004 Cisco Systems, Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. [. . . ] Enter the IP address of the Phone Adapter. For example, if the Phone Adapter's IP address is 192. 168. 1. 100, you would enter 100 in the field provided. Repeat steps 5-7 until you have entered all four port ranges for the Phone Adapter. Application Internet phone 1 Internet phone 2 Internet phone 3 Internet phone 4 Start and End 5060 to 5061 53 to 53 69 to 69 10000 to 20000 Protocol UDP UDP UDP UDP IP Address (IP address of Phone Adapter) (IP address of Phone Adapter) (IP address of Phone Adapter) (IP address of Phone Adapter) Enable X X X X 9. Check the Enable option for the port services you want to use. When you have completed the configuration, click the Save Settings button. Appendix A: Troubleshooting Common Problems and Solutions 19 Phone Adapter with 2 Ports for Voice-over-IP 3. When I'm on a telephone call, words are dropped intermittently. Go through this checklist until your problem is solved: · Are you using a wireless router and cordless phone?If so, the router and cordless phone may be using the same frequency and interfere with each other. Move the cordless phone farther away from the router. · There may be heavy network activity, particularly if you are running a server or using a file sharing program. Try to limit network or Internet activity during any Internet telephone call. For example, if you are running a file sharing program, files may be uploaded in the background even though you are not downloading any files, so make sure you exit the program before you make an Internet phone call. · There may not be enough bandwidth available for your call. You can test your bandwidth at http://www. pcpitstop. com/internet/Bandwidth. asp. If necessary, you can lower your service's default codec setting, which is High (90k). First, access your service account at www. vonage. com. Then lower the codec setting to Med (50k) or Low (30k). For more information, visit www. vonage. com. My telephone does not ring, and my calls automatically go to voicemail. Go through this checklist until your problem is solved: · Make sure the telephone is plugged into the appropriate port, PHONE 1 or PHONE 2. (You should use the Phone 2 port only if you have more than one Vonage phone line. ) · Make sure the ringer volume on your telephone is set to an audible level. · Follow these instructions to reboot your cable or DSL modem, Phone Adapter, and router: 1. [. . . ] ALL IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THE WARRANTY PERIOD. ALL OTHER EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF NONINFRINGEMENT, ARE DISCLAIMED. Some jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to You. This warranty gives You specific legal rights, and You may also have other rights which vary by jurisdiction. [. . . ]