User manual LINKSYS PCM200HA

[. . . ] HomeLink® Series Phoneline 10M Integrated PC Card Use this User Guide to Install the PCM200HA User Guide COPYRIGHT & TRADEMARKS Copyright © 2001 Linksys, All Rights Reserved. HomeLink is a registered trademark of Linksys. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks and brand names are the property of their respective proprietors. [. . . ] The Windows Logon screen doesn't appear after you restart your computer. · Click on Start, Shut Down, then select Log Off. If this doesn't solve the problem, your PC's manufacturer may have disabled Windows' networking. Contact your computer's manufacturer for help. After entering a username and password, a window appears that reads, "No Domain Server could be found to validate your Username and Password. " · Click on Start, Settings, Control Panel. Under The Following Network Components are Installed box, highlight Client for Microsoft Networks and click on the Properties button. Once you are in the Client For Microsoft Networks Properties window, make sure that Log on to Windows NT Domain is unchecked. Once you have made sure that it is unchecked click on the OK button and restart your computer. 6. On the Access Control Tab, User Level Access is selected, but Shared Level Access is grayed out and not accessible. · You previously had your primary network logon set to Client for NetWare Networks. On the Configuration tab of the Network Properties window, ensure that your primary network logon is set to Client for Microsoft Networks. · Your personal web server PC or Microsoft Front Page may require you to choose a user level for security reasons. In Network Neighborhood you can only see your self and no other computers on the network. · Make sure that the cables are connected correctly. Make sure you are getting Link or Activity lights on both the Phoneline Card and your hub. Try changing to a new cable that you know is working. · Your workgroup name may be different from other computers on your network. Make sure each PC on the network is using the same workgroup name and protocol. · Try using the Find Computer function (see problem 11). In Network Neighborhood, you can see all other computers on the network but not yourself, and all other computers can see each other and not your computer. · You may have not have enabled File and Printer Sharing. · The network card might not be setup properly. [. . . ] The Network Adapters category should be removed from the Device Manager listing. Click the OK button, and restart your computer. Manually Installing the Network Components in Windows 28 29 Linksys HomeLink Series Phoneline 10M Integrated PC Card NetBEUI Click the Add button. Under Manufacturer, highlight Microsoft. [. . . ]