User manual LINKSYS PPS1UW

[. . . ] Instant EtherFast® Series EtherFast WirelessReady USB PrintServer ® Use this Guide to install: Model No. : PPS1UW User Guide COPYRIGHT & TRADEMARKS Copyright © 2002 Linksys, All Rights Reserved. Instant EtherFast and EtherFast are registered trademarks of Linksys. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks and brand names are the property of their respective proprietors. [. . . ] If no Domain name exists there, you will use the Workgroup name from that window. Under Options, you can also specify the Response Time that you prefer for the PrintServer. This is the amount of time (measured in seconds) that the PrintServer will wait for a response from the network before "timing out. " You also have the option to Abort Print Job if Error. Selecting Yes here will terminate the printing if there is an error of any kind. If you select No, print jobs that have errors will be sent to the printer, but might not print properly. If you make any mistakes prior to saving, you can simply hit the Cancel button, to exit the screen without making any changes. Once you are certain of any changes you have made, click the Save button to implement the changes. 31 32 Figure 7-5 Note: Linksys does not provide technical support for SNMP management. Click the SNMP tab to view or change the SNMP settings of the WirelessReady PrintServer. The PrintServer supports SNMP (Simple Network Management Protocol). This allows network supervisors to monitor and control the PrintServer using network management platforms such as HP OpenView, IBM SystemView, etc. The appropriate MIB file must be imported into your SNMP management program using the Import-Compile command. Check your management program for details on this procedure. The MIB file is provided in the Mib folder on the CD-ROM. The name of the file is Mib1p. mib. Instant EtherFast® Series EtherFast® Wireless-Ready USB PrintServer General SysContact Text Field - Name of the contact person. SysLocation Text Field - Location of the contact person. Select the Management station (1. . 4), and click the Get Data button to update the display for the selected item. IP Address Enter the IP Address of the management station that has the SNMP program installed. Enter the name of the community, normally "public" or "private" . Access Select the desired level of access. Select the Trap Receiver number (1. . 4), and click the Get Data button to update the display for the selected item. IP Address Enter the IP Address of the Trap Receiver that will be sent the Trap message. Enter the name of the community, normally "public" or "private". [. . . ] USB is integrated into most Windows operating systems. Today, most new computers and peripheral devices are equipped with USB. A different "plug-and-play" standard, FireWire/IEEE 1394, is designed to support much higher data rates and devices such as video camcorders and digital video disk (digital versatile disk) players. Both standards are expected to exist together, serving different device types. [. . . ]