User manual LINKSYS RE2000

[. . . ] ащитен ключ) в полетата Network key (Мрежов ключ) и Confirm network key (Потвърждаване на мрежовия ключ) и след това щракнете върху Connect (Свърз Sådan bruger du det browser-baserede hjælpeprogram Hvis du ændrer på indstillinger i et skærmbillede, skal du klikke på Save Settings (Gem indstillinger) for at dine ændringer skal træde i kraft, eller klik på Cancel Changes (Annuller ændringer) for at fortryde dine ændringer. Den type sikkerhedsinformation, som kræves i dette skærmbillede, skal matche de trådløse sikkerhedsindstillinger for dit access point eller din router. For at mindske signalblokeringer kan du afprøve forskellige placeringer for routeren og extenderen. ς (Κλειδί ασφαλείας) στα πεδία Network key (Κλειδί δικτύου) και Confirm network key (Επιβεβαίωση RE1000 RE2000 User Guide Linksys Wireless-N Range Extender Linksys Wireless-N Range Extender Introduction Introduction This Getting Started guide can help you connect the extender to your network and solve common setup issues. [. . . ] Click Help on the right side of the screen for additional information on the screen’s options. 6 Linksys Wireless-N Range Extender Contents Connecting with the Wi-Fi Protected Setup Button Use this method if your router or access point has a Wi-Fi Protected Setup button. Using Wi-Fi Protected Setup Wi-Fi Protected Setup™ makes it easy to connect your extender to your network, then connect other devices to your network through the extender. Wi-Fi Protected Setup light activity •• •• •• When the Wi-Fi Protected Setup process is active, the light flashes slowly. When the Wi-Fi Protected Setup is successful, the light is continuously lit. If there is an error, the light flashes quickly for two minutes; please wait and try again. Wait until the light is continuously lit before starting the next Wi-Fi Protected Setup session. Click or press the Wi-Fi Protected Setup button on the extender. Click the Wi‑Fi Protected Setup button on the router’s Wi-Fi Protected Setup screen (if available), OR press and hold the Wi-Fi Protected Setup button on the router for one second. When the connection is complete, the Wi-Fi Protected Setup light on the extender is continuously lit. If you used the extender’s Wi-Fi Protected Setup screen, click OK in that screen within two minutes. Connecting the extender to an existing access point If your access point or router supports it, you can use Wi-Fi Protected Setup to connect the range extender to the access point or router. Choose from the setup methods below to connect the extender. NOTE If you have an access point or a router that do not support Wi-Fi Protected Setup, note the wireless settings, and then manually configure the extender. Connecting with the range extender’s PIN The Wi-Fi Protected Setup PIN (Personal Identification Number) can be found on the product label of the extender. You can use this method only if your router’s administration utility has a Wi-Fi Protected Setup menu. Enter the extender’s PIN into the appropriate field on the router’s WiFi Protected Setup screen, then click Register. When the connection is complete, the Wi-Fi Protected Setup light on the extender is continuously lit. 7 Linksys Wireless-N Range Extender Connecting devices to your network through the extender If you have network devices, such as wireless printers, that support Wi-Fi Protected Setup, then you can use Wi-Fi Protected Setup to connect them to your wireless network. Choose from the methods below to connect the device to your network. Contents Connecting with the Wi-Fi Protected Setup Button Use this method if your client device has a Wi-Fi Protected Setup button. Click or press the Wi-Fi Protected Setup button on the client device. [. . . ] Se hjelpen for datamaskinens operativsystem for instruksjoner. Slik bruker du det webbaserte verktøyet Hvis du gjør endringer, må du klikke på Save Settings (Lagre innstillinger) for å ta dem i bruk eller på Cancel Changes (Forkast endringer) for å forkaste dem. Du kan prøve ulike plasseringer for ruteren og utvideren for å minimere hindringer for signalet. For instruksjoner for Mac, kan du se“Slik fikser du problemet på en Mac-maskin:” på side 12. [. . . ]