User manual LINKSYS RV042

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual LINKSYS RV042. We hope that this LINKSYS RV042 user guide will be useful to you.

Lastmanuals help download the user guide LINKSYS RV042.


Mode d'emploi LINKSYS RV042
Download
Manual abstract: user guide LINKSYS RV042

Detailed instructions for use are in the User's Guide.

[. . . ] ® A Division of Cisco Systems, Inc. 10/100 4-Port VPN Router WIRED User Guide Model No. RV042 10/100 4-Port VPN Router Copyright and Trademarks Linksys is a registered trademark or trademark of Cisco Systems, Inc. Copyright © 2004 Cisco Systems, Inc. All rights reserved. How to Use this Guide This User Guide has been designed to make understanding networking with the Router easier than ever. Look for the following items when reading this Guide: This checkmark means there is a Note of interest and is something you should pay special attention to while using the Router. This exclamation point means there is a Caution or Warning and is something that could damage your property or the Router. This question mark provides you with a reminder about something you might need to do while using the Router. In addition to these symbols, there are definitions for technical terms that are presented like this: word: definition. [. . . ] Dynamic IP + E-mail Addr. (USER FQDN) Authentication: If the Local Security Gateway has a dynamic IP, select this type. When the Remote Security Gateway requests to create a tunnel with the Router, the RV042 will work as a responder. If you select this type, just enter the E-mail address for Authentication. Local Security Group Type Select the local LAN user(s) behind the router that can use this VPN tunnel. Local Security Group Type may be a single IP address, a Subnet or an IP range. The Local Secure Group must match the Remote VPN Client's Remote Secure Group. IP Address: If you select IP Address, only the computer with the specific IP Address that you enter will be able to access the tunnel. Subnet: If you select Subnet (which is the default), this will allow all computers on the local subnet to access the tunnel. Enter the IP Address and the Subnet Mask. The default IP is 192. 168. 1. 0, and default Subnet Mask is 255. 255. 255. 192. IP Range: If you select IP Range, it will be a combination of Subnet and IP Address. You can specify a range of IP Addresses within the Subnet which will have access to the tunnel. The default IP Range is 192. 168. 1. 0~254. Chapter 6: Set Up and Configure the Router VPN Tab - Client to Gateway 48 10/100 4-Port VPN Router Remote Client Setup With Tunnel enabled: Remote Client: There are five types of Remote Client: IP, IP + Domain Name (FQDN)Authentication, IP + E-mail Addr. (User FQDN) Authentication, Dynamic IP + Domain Name (FQDN) Authentication, Dynamic IP + E-mail Addr. IP Only: If you know the fixed IP of the remote client, you can select IP and enter the IP Address. Only the specific IP Address that you enter will be able to access the tunnel. This IP Address can be a computer with VPN client software that supports IPSec. IP + Domain Name(FQDN) Authentication: If you select this type, enter the FQDN (Fully Qualified Domain Name) and IP address of the client user with VPN client software that supports IPSec at the other end of the tunnel. The FQDN is the host name and domain name for a specific computer on the Internet, for example, vpn. myvpnserver. com. The IP and FQDN must be the same as the Local Gateway of the remote client, and the same IP and FQDN can be used only for one tunnel connection. IP + E-mail Addr. (User FQDN) Authentication: If you select this type, enter the e-mail address and IP address of the client user with VPN software that supports IPSec at the other end of the tunnel. Dynamic IP + Domain Name(FQDN) Authentication: If you select this type, the Remote Security Gateway will be a dynamic IP, so you don't need to enter the IP address. When the Remote Security Gateway requests to create a tunnel with the RV042, the RV042 will work as a responder. [. . . ] ALL IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THE WARRANTY PERIOD. ALL OTHER EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF NON-INFRINGEMENT, ARE DISCLAIMED. Some jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to You. This warranty gives You specific legal rights, and You may also have other rights which vary by jurisdiction. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE LINKSYS RV042

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual LINKSYS RV042 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag