User manual LINKSYS SPA3000 PRODUCT BROCHURE

[. . . ] Telephone Adapter with 1 FXS and 1 FXO Port PRODUCT DATA ATA Solution with a PSTN Gateway Toll Quality Voice and CarrierGrade Feature Support The SPA3000 delivers clear, high-quality voice communication in a variety of network conditions. Excellent voice quality in challenging, changeable IP network environments is made possible via our advanced implementation of standard voice coding algorithms. [. . . ] MAC Address (IEEE 802. 3) IPv4 - Internet Protocol v4 (RFC 791) upgradeable to v6 (RFC 1883) ARP - Address Resolution Protocol DNS - A Record (RFC 1706), SRV Record (RFC 2782) DHCP Client - Dynamic Host Configuration Protocol (RFC 2131) ICMP - Internet Control Message Protocol (RFC792) TCP - Transmission Control Protocol (RFC793) UDP - User Datagram Protocol (RFC768) RTP - Real Time Protocol (RFC 1889) (RFC 1890) RTCP - Real Time Control Protocol (RFC 1889) DiffServ (RFC 2475), Type of Service - TOS (RFC 791/1349) SNTP - Simple Network Time Protocol (RFC 2030) SIPv2: Session Initiation Protocol v2 (RFC 3261, 3262, 3263, 3264) SIP Proxy Redundancy - Dynamic via DNS SRV, A Records Re-registration with Primary SIP Proxy Server SIP Support in Network Address Translation Networks - NAT (incl. STUN) Secure (Encrypted) Calling via Pre-Standard Implementation of Secure RTP Codec Name Assignment G. 711 (A-law and µ-law), G. 726 (16/24/32/40 kbps), G. 729 A, G. 723. 1 (6. 3 kbps, 5. 3 kbps) Dynamic Payload Adjustable Audio Frames per Packet Fax Tone Detection and Pass-Through (Using . 711) DTMF: In-band & Out-of-band (RFC 2833) (SIP Info) Flexible Dial Plan Support with Interdigit Timers and IP Dialing Call Progress Tone Generation Jitter Buffer - Adaptive Frame Loss Concealment Full Duplex Audio Echo Cancellation (G. 165/G. 168) VAD - Voice Activity Detection with Silence Suppression Attenuation / Gain Adjustments Flash Hook Timer MWI - Message Waiting Indicator Tones VMWI - Visual Message Waiting Indicator via FSK Polarity Control Hook Flash Event Signaling Caller ID Generation (Name & Number) - Bellcore, DTMF, ETSI Music on Hold Client Streaming Audio Server - up to 10 sessions Web Browser Administration & Configuration via Integrated Web Server Telephone Key Pad Configuration with Interactive Voice Prompts Automated Provisioning & Upgrade via HTTPS, HTTP, TFTP Asynchronous Notification of Upgrade Availability via SIP NOTIFY Non-intrusive, In-Service Upgrades Report Generation & Event Logging Stats in BYE Message Syslog & Debug Server Records - Per Line Configurable 1 10baseT RJ-45 Ethernet Port (IEEE 802. 3) 1 RJ-11 FXS Phone Ports - For Analog Circuit Telephone Device (Tip/Ring) 1 RJ-11 FXO Phone Ports - For a Telco or PBX Connection Ring Voltage: 40-55 VRMS Configurable l* Ring Frequency: 10 Hz - 40 Hz l* Ring Waveform: Trapezoidal and Sinusoida l* Maximum Ringer Load: 3 REN On-hook/off-hook Characteristics: On-hook voltage (tip/ring): -50 V NOMINAL Off-hook current: 25 mA min Terminating Impedance: 8 Configurable Settings including North America 600 ohms, European CTR21 DC Input Voltage: +5 VDC at 2. 0 A Max. Power Consumption: 5 Watts Switching Type (100-240v) Automatic Power Adapter: 100-240v - 50-60Hz (26-34VA) AC Input, 1. 8m cord LAN Activity/Link LED, Status LED (In-Use, Povisioning, Idle, Alert) PRODUCT DATA Model No. SPA3000 The SPA3000 features the same VoIP adapter functionality found in the SPA1000 and SPA2002 with an additional benefit of an integrated connection for legacy telephone network "hop-on, hop-off" applications. SPA3000 users will be able to leverage their broadband phone service connections more than ever by automatically routing local calls from cell phones and land lines to VoIP service providers and vice versa. If power is lost to the unit or Internet service is down, calls can be redirected to a traditional carrier via the FXO interface. A user calling from a land line or mobile phone will be able to reduce and even eliminate international and long distance telephone charges by first calling their SPA3000 via a local phone number. The advanced authentication and call routing intelligence programmed into the SPA3000 will connect the caller via the Internet to the far end destination. Using the SPA3000 at the far end, calls can be answered immediately or further processed as a local call to any legacy land line or mobile phone. The SPA3000 supports one RJ11 POTS (Plain Old Telephone Service) FXS port for connection to existing analog phones and fax machines. The SPA3000 also supports one PSTN FXO port connection to a Telco or PBX circuit. The SPA3000 includes an RJ45 Ethernet interface for connection to a home or office LAN. The SPA3000 FXS and FXO lines can be independently configured via software controlled by the service provider or the end user. [. . . ] Copyright © 2006 Cisco Systems, Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. SPA3000-SP-DS- 60123NC BW [. . . ]