User manual LINKSYS SVIEW08

[. . . ] ProConnect® Series ProConnect 8-Station KVM Switch ® Use this Guide to install: SVIEW08 v2 User Guide COPYRIGHT & TRADEMARKS Copyright © 2001 Linksys, All Rights Reserved. ProConnect is a registered trademark of Linksys. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks and brand names are the property of their respective proprietors. [. . . ] All operations start from the OSD Main Menu. To pop up the Main Menu, tap either CTRL key twice. You can optionally change the OSD keys from the CTRL key to the Scroll Lock key from the OSD Main Menu. Thus, you would press the Scroll Lock key twice. When you invoke the OSD, a screen similar to that shown below will appear: OSD Menu Navigation To cancel the current selection on the menu screen, press the ESC key. This will also move back one menu screen and, if on the main menu screen, it will also close the OSD menu. To move up or down through the menu list, press the up or down arrows on your keyboard or click the Up or Down Triangles on the menu screen. To move up or down through the menu screens, press the Page Up or Page Down keys on your keyboard or click the Up or Down arrows on the menu screen. To activate a port, move the Highlight Bar to it and press the Enter key. After executing any action, you will automatically be brought back to the previous menu screen. OSD HotKey Navigation HotKey navigation can also be used under OSD, as follows: 1. From the OSD Main Menu, press [CTRL] + [ALT] + [SHIFT] keys in sequence (not at the same time). Then, type in the Port ID for the computer you wish to access (refer to the Port ID Numbering section for more information on this), then press the Enter key. The Port ID number must be typed within one second of invoking HotKey navigation and should be typed from the keyboard, not the number pad. The console now controls the computer that you have selected. The OSD will automatically close. OSD always starts in List view, with the highlight bar at the same position it was in the last time it was closed. 14 15 ProConnect® Series ProConnect® 8-Station KVM Switch OSD Main Menu Headings HEADING PN EXPLANATION This column lists the Port ID numbers for all the active CPU Ports . The simplest method to access a particular PC is to move the Highlight Bar to the Port ID, then press the [Enter] key. If a port has been selected for Quick View scanning (F2 and F4 in The OSD Function Keys), a triangle will appear in this column. Lists all of the CPU ports currently active. If a port has been given a name (F5 in The OSD Function Keys), its name appears here. · F2 (Scan) Pressing the F2 key initiates Quick View Scanning, in which the OSD cycles through all of the ports that are currently selected in the List view (see F3, below), and displays each one for the amount of time specified with the Set Scan Duration setting (see F6, Set). When you want to stop at a particular location, press the Spacebar to stop scanning. As each computer is accessed, an [S] appears in front of the Port ID display on the OSD to indicate that it is being accessed under Quick View Scan Mode. [. . . ] 3 Seconds. 21 ProConnect® Series ProConnect® 8-Station KVM Switch Troubleshooting This section provides possible solutions to problems regarding the installation and operation of the 8-Station KVM Switch. If you can't find an answer here, check the Linksys website at www. linksys. com. · The connection from the selected port to a target PC has been broken or the computer is turned off. Check the Online Port LED for the selected port. [. . . ]