User manual LINKSYS USB200HA

[. . . ] HomeLinkTM Series Phoneline 10M USB Network Adapter Model No. : USB200HA User Guide COPYRIGHT & TRADEMARKS Copyright © 2000 Linksys, All Rights Reserved. Phoneline 10M USB Network Adapter is a registered trademark of Linksys. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks and brand names are the property of their respective proprietors. [. . . ] The Driver File Search Results window will appear. The Locate Driver Files window will appear. Select the "Floppy disk drives" option and insert the driver disk into your floppy drive. The Completing the Found New Hardware Wizard window will appear with the name of your adapter, Linksys Phoneline 10M USB Network Adapter. Remove the driver disk from your floppy drive. The Windows 2000 HomeLink driver installation is now complete. If you want to share files or printers, see your Microsoft documentation or ask your network administrator. 20 21 Linksys HomeLinkTM Series Phoneline 10M USB Network Adapter Troubleshooting 1. Windows doesn't detect new hardware when the HomeLink Adapter hardware is installed, or it continues to detect the adapter each time I restart the PC. · You may not have installed the adapter correctly or securely into the appropriate port of your PC. Check that the adapter is securely inserted into the appropriate port. · The system BIOS may not be USB-compatible, your PC's USB settings may be disabled, or the motherboard may have USB options not supported by Windows 98 or Windows 2000. If you are not sure, contact your PC's manufacturer. Windows can't locate the driver for the HomeLink Adapter device. · You may have inserted the wrong disk into your PC's disk drive. · The disk may be defective, files may be missing, or you may be pointing Windows to the wrong directory or drive. · You can download the correct driver from our website www. linksys. com. The Windows Logon screen does not appear after I restart my PC. If this doesn't solve the problem, your PC's manufacturer may have disabled Windows' networking. Contact your computer's manufacturer for help. If using Windows 2000, refer to your Microsoft documentation. On the Access Control Tab, User Level Access is selected, but Shared Level Access is grayed out and not accessible. · You previously had your primary network logon set to Client for NetWare Networks. [. . . ] Right-click on Linksys Phoneline 10M USB Network Adapter again. The Network Adapters category should no longer be listed. Click the OK button, restart your computer, and go to page 19 to install the Windows 2000 driver. Linksys HomeLinkTM Series Phoneline 10M USB Network Adapter IPX/SPX-compatible protocol Click the Add button. Choose Protocol and click the Add button. [. . . ]