User manual LINKSYS USB200M

[. . . ] Instant EtherFast® Series Compact USB 2. 0 10/100 Network Adapter Use this guide to install: USB200M User Guide EC Declaration of Conformity (Europe) In compliance with the EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC, and Amendment Directive 93/68/EEC, this product meets the requirements of the following standards: · EN55022 Emission · EN55024 Immunity Industry Canada (Canada) This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe (B) est conforme à la norme NMB-003 du Canada. COPYRIGHT & TRADEMARKS Copyright © 2002 Linksys, All Rights Reserved. EtherFast and Linksys are registered trademarks of Linksys. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation. [. . . ] · If all computers are using the same protocol(s) and workgroup name, and Windows 95 computers can't see Windows 98 computers, enable NetBIOS on all the computers using Windows 95 and 98. · IPX/SPX-compatible Protocol should be installed on all computers. · Bring up the properties of the IPX/SPX-compatible Protocol. To do this, click Start, Settings, and Control Panel. Double-click Network, and click the Configuration tab. Highlight IPX/SPX-compatible Protocol (only one of them), and click Properties. Compact USB 2. 0 10/100 Network Adapter · Click the NetBIOS tab. Put a check next to I want to enable NetBIOS over IPX/SPX and click OK. · After Windows finishes copying the appropriate files, restart your computer. When you've returned to the desktop, open Network Neighborhood or My Network Places, and look for the other PCs on your network. In Network Neighborhood, I can only see some of the computers. · Choose Start, Find, and Computer. Enter the name of the computer in the window that comes up, and click Find Now. · Now make sure that you are using the same protocol(s) and workgroup name on all other computers. To do this, click Start, Settings, Control Panel on two computers running different Windows operating systems. Click the Network icon, choose the Configuration tab, and then click the Identification tab for workgroup name. Compare the protocols on both computers and make sure that they are the same. If any protocols are missing, refer to the Windows documentation to install any needed protocol(s). · Ensure that file and print sharing is enabled on every computer. · Verify that Client for Microsoft Networks is installed. Right-click the Network Neighborhood icon, and select Properties. On the Network screen, click the Configuration tab and see if Client for Microsoft Networks is installed. If it is not, see your Windows documentation for instructions. [. . . ] TCP/IP defines a suite or group of protocols and not only TCP and IP. Throughput - The amount of data moved successfully from one place to another in a given time period. Topology - A network's topology is a logical characterization of how the devices on the network are connected and the distances between them. The most common network devices include hubs, switches, routers, and gateways. [. . . ]