User manual LINKSYS USB2HUB4

[. . . ] IN NO EVENT SHALL LINKSYS' LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE, OR ITS DOCUMENTATION. LINKSYS DOES NOT OFFER REFUNDS FOR ANY PRODUCT. Linksys makes no warranty or representation, expressed, implied, or statutory, with respect to its products or the contents or use of this documentation and all accompanying software, and specifically disclaims its quality, performance, merchantability, or fitness for any particular purpose. Linksys reserves the right to revise or update its products, software, or documentation without obligation to notify any individual or entity. [. . . ] The new USB 2. 0 devices are fully backward compatible with earlier USB devices. USB 2. 0 offers you increased functionality and additional bandwidth, allowing you to add more peripherals to your computers. USB Icon The USB icon marks a USB port on a PC or device. Figure 1-1 · · · · · One ProConnect USB 4-Port Hub USB 2. 0 One USB Cable One Power Adapter One User Guide One Registration Card (not shown) System Requirements USB-Ready PC with the following: · One Free USB Port · Microsoft Windows 98, 2000, Millennium, or XP Figure 2-1 2 3 ProConnect® Series USB Cabling The USB 4-Port Hub comes with one USB cable. One end of the USB cable has a rectangular connector called a Type A connector. The other end of the cable has a square Type B connector. The USB cable's Type B end connects to the USB device (in this case, the USB 4-Port Hub). The Type A end connects to a computer's USB port. USB 4-Port Hub USB 2. 0 Chapter 3: Getting to Know the USB 4-Port Hub The USB 4-Port Hub's Ports The Hub's USB and power ports are located on the back panel. USB Type A Figure 2-2 USB Type B USB Ports 1-4 Figure 3-1 Figure 2-3 shows two USB ports as they might appear on your computer. Note the two USB icons marking the ports. USB ports 1-4 are Type A connectors. Connect the USB cables from your USB peripherals to these ports. The remaining USB port is a Type B connector. Connect the USB cable from your USB-equipped computer to this port. Plug the power adapter into this power port. USB Figure 2-3 Power Port 4 5 ProConnect® Series The USB 4-Port Hub's LEDs USB 4-Port Hub USB 2. 0 Chapter 4: Installing the USB 4-Port Hub 1. Plug the power adapter into the electrical outlet. Plug the power adapter into the power port of the USB 4-Port Hub. Figure 3-2 Power Amber. The Power LED lights up when the Hub is powered on and connected to the PC. When a peripheral is connected to a specific port and there is activity, the associated LED will light up. 1-4 Figure 4-1 3. For connection to the PC, plug the Type B connector of the included USB cable into the Hub's USB Type B port. Figure 4-2 6 7 ProConnect® Series 4. Plug the other end of the USB cable into the PC's USB port. The computer's operating system will install the appropriate driver automatically. You may be asked to supply your original Windows CD installation files, which include all necessary drivers and files. Using additional USB cables, plug your USB peripherals into the Hub. USB 4-Port Hub USB 2. 0 Appendix A: Troubleshooting Common Problems and Solutions This chapter provides solutions to problems that may occur during the installation and operation of the USB 4-Port Hub. Read the descriptions below to help solve your problems. [. . . ] USB also supports hot-swapping, the addition or removal of devices while the computer is running. USB 1. 1-compliant devices support data rates of 1. 5Mbps (low-speed) and up to 12Mbps (full-speed). USB 2. 0-compliant devices are backward compatible with earlier USB devices, and they support data rates of 1. 5Mbps (low-speed), 12Mbps (full-speed), and up to 480Mbps (high-speed). Appendix C: Specifications Standards: Ports: OHCI, UHIC, USB 1. 1 and 2. 0 One USB Type B Root Port Four USB Type A Device Ports 480 (High Speed) 12 (Full Speed) 1. 5 (Low Speed) Speeds (Mbps): Maximum Number of Devices: Cabling: 127 (when multiple hubs are daisy-chained together) USB Cable 16. 4' (5 m) Maximum Power 1-4 (Activity for each Port) 500 mA per Device Port (maximum) LEDs: Current: Environmental Dimensions: Unit Weight: Power: Certifications: Operating Temp. : Storage Temp. : Operating Humidity: Storage Humidity: 3. 15" x 2. 3" x 1. 05" (80 mm x 58. 36 mm x 26. 6 mm) 2. 5 oz. (0. 07 kg) DC 5V DC, 2. 4 A FCC Class B, CE Mark, VCCI 32ºF to 158ºF (0ºC to 70ºC) -4ºF to 176ºF (-20ºC to 80ºC) 0% to 95%, Non-Condensing 0% to 95%, Non-Condensing 10 11 ProConnect® Series USB 4-Port Hub USB 2. 0 Appendix D: Warranty Information BE SURE TO HAVE YOUR PROOF OF PURCHASE AND A BARCODE FROM THE PRODUCT'S PACKAGING ON HAND WHEN CALLING. [. . . ]