User manual LINKSYS WAP54GP

[. . . ] ® A Division of Cisco Systems, Inc. 2. 4 GHz Wireless-G 802. 11g WIRELESS Access Point with Power Over Ethernet User Guide Model No. WAP54GP Wireless-G Access Point with Power Over Ethernet Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. Copyright © 2005 Cisco Systems, Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. [. . . ] Click Help for more information. Figure 5-21: Administration - Reboot Screen Chapter 5: Configuring the Wireless-G Access Point with Power Over Ethernet The Administration - Language Upgrade Tab 30 Wireless-G Access Point with Power Over Ethernet The Administration - Config Management Tab On this screen you can create a backup configuration file or save a configuration file to the Access Point. Config Management Use this screen to upload or download configuration files for the Access Point. To save a backup configuration file on a computer, click the Download AP Configuration File button and follow the on-screen instructions. To upload a configuration file to the Access Point, enter the location of the configuration file in the field provided, or click the Browse button to find the file. Figure 5-22: Administration - Config Management Screen Chapter 5: Configuring the Wireless-G Access Point with Power Over Ethernet The Administration - Config Management Tab 31 Wireless-G Access Point with Power Over Ethernet The Status - Local Network Tab The Local Network screen displays the Access Point's current status information for the local network. Information Hardware Version. This is the version of the Access Point's current hardware. This is the version of the Access Point's current software. The MAC address of the Access Point's Local Area Network (LAN) interface is displayed here. This is the length of time the Access Point has been running. Local Network IP Address. This shows the Access Point's IP Address, as it appears on your local network. This shows the Access Point's Subnet Mask. Displayed here is the IP address of the Access Point's Default Gateway. DNS addresses used by the Access Point are displayed here. To update the status information, click the Refresh button. Figure 5-23: Status - Local Network Screen Chapter 5: Configuring the Wireless-G Access Point with Power Over Ethernet The Status - Local Network Tab 32 Wireless-G Access Point with Power Over Ethernet The Status - Wireless Tab The Wireless screen displays the Access Point's current status information for the wireless network(s). Wireless Network MAC Address. The MAC Address of the Access Point's wireless interface is displayed here. The Access Point's mode is displayed here. The Access Point's main SSID is displayed here. The Access Point's virtual SSIDs are displayed here. The Access Point's Channel setting for wireless broadcast is shown here. The status of the Access Point's VLAN feature is shown here. The VLAN Priority Setting for the main SSID is shown here. The wireless security setting for the main SSID is displayed here. [. . . ] Wireless Adapters Wireless adapters have the power output set to 100% by default. Maximum power output on each adapter does not exceed 20 dBm (100 mW); it is generally 18 dBm (64 mW) or below. If you need to alter your wireless adapter's power output, follow the appropriate instructions for your computer's Windows operating system: 59 Appendix H: Regulatory Information Wireless-G Access Point with Power Over Ethernet Windows XP 1. Double-click the Wireless icon in your desktop's system tray. [. . . ]