User manual LINKSYS WGA11B

[. . . ] Wireless-B Game Adapter Use this guide to install: WGA11B User Guide COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. Copyright © 2003 Cisco Systems, Inc. Linksys is a registered trademarks of Cisco Systems, Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. [. . . ] · Exit - Click Exit to exit the Setup Wizard. Click Setup to begin the setup process. 2. The Setup Wizard will search for the Game Adapter. If it cannot find one, you will be asked to check the connections, as shown in Figure 5-2. Review your connections and click Continue. The next screen, shown in Figure 53, will show the Game Adapter's current settings. · New Keyphrase The Game Adapter is designed to work right out of the box. If you are concerned with security, however, you can set the same Keyphrase on two Game Adapters Figure 5-3 to utilize WEP. The Keyphrase is case-sensitive and should have nine or fewer alphanumeric characters. It must match the Keyphrase of your wireless network and is compatible with Linksys wireless products only. Click the Next button to continue with the setup. 4. When the Game Adapter is located, you will be asked to enter your network password. Type the password in the field, as shown in Figure 5-4, and click Enter. Figure 5-1 8 Figure 5-4 9 5. From the Basic Settings screen, shown in Figure 5-5, select the IP Address setting for the Game Adapter. Obtain IP Address automatically should only be selected if you are connected to a network with a DHCP server, allowing it to administer the IP Address automatically. Otherwise, select Specify an IP Address. If you are not familiar with IP Address settings, leave the default settings. Your password can also be changed from this screen by typing your old password and entering the new password in the appropriate fields. Once the selection is made, click Next to continue or Back to return to the previous screen. · Passphrase - Instead of manually entering a WEP key, you can enter a Passphrase, and the WEP Key will appear in the Key field. The Passphrase is case-sensitive and should have 16 or fewer alphanumeric characters. It must match the passphrase of your wireless network and is compatible with Linksys wireless products only. (You will have to enter the WEP key manually on any non-Linksys wireless products. ) Write down the Passphrase and click Next to continue. [. . . ] SSID (Service Set IDentifier) - A unique name shared among all points in a wireless network. The SSID must be identical for each point in the wireless network and is case-sensitive. A data switch connects computing devices to host computers, allowing a large number of devices to share a limited number of ports. A device for making, breaking, or changing the connections in an electrical circuit. [. . . ]