User manual LINKSYS WRE54G

[. . . ] ® A Division of Cisco Systems, Inc. 2. 4 GHz Wireless-G 802. 11g Range Expander WIRELESS Model No. User Guide WRE54G Wireless-G Range Expander Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. Copyright © 2005 Cisco Systems, Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. [. . . ] (This is available only if you have an active Internet connection. ) Figure 6-7: Setup Tab - Help Online User Guide in PDF Format. For an online user guide in PDF format, click this link. If you do not have the Adobe Reader installed on your computer, click the Adobe Website link or go to the Setup Wizard CD-ROM to download this software. (To access the Adobe website, you will need an active Internet connection. ) To download from the CD-ROM, click the Start button and select Run. Type D:\Acrobat (if "D" is the letter of your CD-ROM drive). Click the Adobe Website link or go to the Setup Wizard CD-ROM to download this software. (To access the Adobe website, you will need an active Internet connection. ) Firmware Upgrade. The version number and date of the Range Expander's current firmware is displayed here. New firmware versions are posted at www. linksys. com and can be downloaded for free. If the Range Expander is not experiencing difficulties, then there is no need to download a more recent firmware version, unless that version has a new feature that you want to use. Loading new firmware does not always enhance the speed or quality of your Internet connection. To upgrade the Range Expander's firmware: 1. Go to the Linksys website, www. linksys. com and proceed to the product page for the Range Expander. Download the firmware upgrade file, and extract it on your computer. Click the Upgrade Firmware button on the Help screen. Enter the location of the firmware upgrade file in the File Path field, or click the Browse button to find the extracted firmware upgrade file. Click the Upgrade button, and follow the on-screen instructions. If you want to cancel the firmware upgrade, click the Cancel button. If you need more information, click the Help button. Figure 6-8: Firmware Upgrade Chapter 5: Configuring the Wireless-G Range Expander The Setup Tab upgrade: to replace existing software or firmware with a newer version. 22 Wireless-G Range Expander Appendix A: Troubleshooting This appendix consists of two parts: "Common Problems and Solutions" and "Frequently Asked Questions. " This appendix provides solutions to problems that may occur during the installation and operation of the Wireless-G Range Expander. Read the description below to solve your problems. If you can't find an answer here, check the Linksys website at www. linksys. com. Common Problems and Solutions 1. [. . . ] EC DECLARATION OF CONFORMITY (EUROPE) Linksys declares that this product conforms to the specifications listed below, following the provisions of the European R&TTE directive 1999/5/EC: EN 301 489-1, 301 489-17 General EMC requirements for Radio equipment. 38 Appendix H: Regulatory Information Wireless-G Range Expander EN 609 50 Safety EN 300-328-1, EN 300-328-2 Technical requirements for Radio equipment. Caution: This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to certain frequencies and/or may require a license for operation. Contact local Authority for procedure to follow. [. . . ]