User manual LINKSYS WRT54GL

[. . . ] USER GUIDE Wireless-G Broadband Router Model: WRT54GL About This Guide About This Guide Icon Descriptions While reading through the User Guide you may see various icons that call attention to specific items. Below is a description of these icons: NOTE: This check mark indicates that there is a note of interest and is something that you should pay special attention to while using the product. WARNING: This exclamation point indicates that there is a caution or warning and it is something that could damage your property or product. wEB: This globe icon indicates a noteworthy website address or e-mail address. [. . . ] Decide which days and what times you want this policy to be enforced. Select the individual days during which the policy will be in effect, or select Everyday. Then enter a range of hours and minutes during which the policy will be in effect, or select 24 Hours. Select any Blocked Services or Website Blocking you wish to use. Click Save Settings to save the policy’s settings, or click Cancel Changes to cancel the policy’s settings. Blocked Services You can filter access to various services accessed over the Internet, such as FTP or telnet, by selecting services from the drop-down menus next to Blocked Services. ) Then enter the range of ports you want to filter. If the service you want to block is not listed or you want to edit a service’s settings, then click Add/Edit Service. To enable a policy, select the policy number from the drop-down menu, and select Enable. to create an Internet Access policy: 1. Select a number from the Internet Access Policy dropdown menu. Wireless-G Broadband Router Port Services 16 Chapter 3 Advanced Configuration Port Range Forward To forward a port, enter the information on each line for the criteria required. Application  In this field, enter the name you wish to give the application. start/End  This is the port range. Enter the number that starts the port range in the Start column and the number that ends the range in the End column. Protocol  Select the protocol used for this application, either TCP or UDP, or Both. IP Address  For each application, enter the IP Address of the PC running the specific application. enable  Select Enable to enable port forwarding for the relevant application. Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes. To add a service, enter the service’s name in the Service Name field. Select its protocol from the Protocol dropdown menu, and enter its range in the Port Range fields. To modify a service, select it from the list on the right. [. . . ] Actually both licenses are BSD-style Open Source licenses. This package is an SSL implementation written by Eric Young (eay@cryptsoft. The implementation was written so as to conform with Netscape’s SSL. This library is free for commercial and non-commercial use as long as the following conditions are adhered to. [. . . ]