User manual LISTAESCAN WORKBENCH HANGING CABINET INSTALLATION INSTRUCTIONS
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual LISTAESCAN WORKBENCH HANGING CABINET INSTALLATION INSTRUCTIONS. We hope that this LISTAESCAN WORKBENCH HANGING CABINET INSTALLATION INSTRUCTIONS user guide will be useful to you.
Lastmanuals help download the user guide LISTAESCAN WORKBENCH HANGING CABINET INSTALLATION INSTRUCTIONS.
Manual abstract: user guide LISTAESCAN WORKBENCH HANGING CABINET INSTALLATION INSTRUCTIONS
Detailed instructions for use are in the User's Guide.
[. . . ] Hanging Cabinet Installation Instructions for Workbenches and Height-RightTM Workbenches
Instructions for installing the hanging drawer to a HeightRightTM workbench
Hardware included: · 2 ¼-20 x 3" hex head bolts (A111997) · 4 ¼ -20 x ½" phillips head screw (A100318) · 6 ¼" washers (A108682) · 2 galvanized channel brackets x (A109586) · 2 rear brackets y · 1 front spacer bracket z Tools required: · ratchet set, with extension · Screwdriver, phillips and flat head · Gloves · Before starting, raise the Height-Right workbench to the highest setting to improve access to underneath of workbench. · For certain housings, you may also need to remove the drawer tracks to access bolts. [. . . ] · Lifting back of housing first, place rear brackets over the bottom flange of rear channel. (See Figure 2) · Lift front of housing and place one channel bracket into the front channel and turn bracket 90º. (See Figure 3) · Secure bolt loosely. · Repeat the same procedure for the second front bracket. · Using a flat head screwdriver, indent tabs on rear brackets so they go over the bottom channel flange. This is important since it prevents the housing from moving when drawer is opened. Figure 1
Rear mouting brackets y
Galv. channel bracketx Front spacer bracket z
Figure 2
Rear Height Right channel (under worksurface)
REAR
Rear hanging cabinet mouting bracket y
SIDE PROFILE (REAR OF HANGING CABINET)
To install hanging drawer to an industrial or technical workbench
· · · · · If possible, turn workbench top upside down to install drawer. Remove drawer, white plastic retainer clip and tracks. If attaching hanging cabinet to a top provided by Lista, drill a 5. 1mm pilot hole. [. . . ] - Holliston, MA 01746 Customer Service: (800) 722-3020 http://www. listaintl. com/ MD030A3 Rev 0 02/2002 2002 Lista International Corp. All Rights Reserved ISO9001 Certified
J:\ASSYINST\MD030A3\HC_REV1. DOC
SIDE PROFILE (FRONT OF HANGING CABINET)
03/01/02 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE LISTAESCAN WORKBENCH HANGING CABINET INSTALLATION INSTRUCTIONS
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual LISTAESCAN WORKBENCH HANGING CABINET INSTALLATION INSTRUCTIONS will begin.
