User manual LOGITECH E3500 PLUS

[. . . ] The power supply must be plugged directly into your wall outlet. Add-On Camera 1 Logitech Alert Camera 2 Camera power supply 3 Power supply cable (yellow tips) 4 Mounting accessories 5 microSDTM card adapter 6 Suction cup 7 Desktop stand 8 Power supply cable extender 9 System Requirements Guide 1 Run Logitech Alert Commander Before you begin the installation, read all instructions. 2 Plug in Your Camera When prompted to connect your camera: 1) Remove the hatch from the back of the camera. 1a) Plug the yellow cable connector into the port. 1b) Use the lock slider to lock the connector in place. [. . . ] 1b) Use the lock slider to lock the connector in place. 2) Plug the yellow cable into the power supply port. 2a) Plug the power supply into an outlet near the PC where the software is installed. 3 Choose Your Camera Location On a desk or table ! Logitech Alert Master System required. 1 1a 1b 2 2a 1) Be sure that Logitech Alert Commander sotware is running on the PC before beginning installation of camera. · Shortly after connecting, your camera will appear in Alert Commander software. You can now move the camera to its desired location. On a window looking out or in Using In-the-box Accessories Wall/Ceiling Mounting Instructions The wall mount allows you to easily fasten your camera to a ceiling or wall. 1) Start by pre-drilling holes into the wall and screwing in the mounting base. 2) Assemble the mounting arm and attach it to the base. See F1 Help for instructions. * See Camera Reset Instructions for assistance. Using the microSDTM card adapter LED OFF ON NOTE: Unplug the camera before removing, replacing, or upgrading your microSD card. To review the video on the microSD card, we recommend using Logitech Alert Commander. On/Off switch for Power Supply LEDs To review the video on the microSD card without Logitech Alert Commander: 1) Open the hatch on the bottom of the camera and remove the microSD card from its port. 2) Plug the microSD card into the adapter. 3) Plug the adapter into the PC's SD card slot. · View video recordings using the free Apple QuickTime player or other player that supports H. 264 video playback. (To download QuickTime, visit http://www. apple. com/quicktime/download/) www. logitech. com 1 2 3 How do I turn these LEDs off? Use the switch located on the side of the power supply to disable these diagnostic LEDs. SMA COM RTM EDIA H I/II MMC/ MS/M PAC TF LAS SD S PRO © 2010 Logitech. Logitech, the Logitech logo, and other Logitech marks are owned by Logitech and may be registered. [. . . ] · View video recordings using the free Apple QuickTime player or other player that supports H. 264 video playback. (To download QuickTime, visit http://www. apple. com/quicktime/download/) www. logitech. com 1 2 3 How do I turn these LEDs off? Use the switch located on the side of the power supply to disable these diagnostic LEDs. SMA COM RTM EDIA H I/II MMC/ MS/M PAC TF LAS SD S PRO © 2010 Logitech. Logitech, the Logitech logo, and other Logitech marks are owned by Logitech and may be registered. [. . . ]