User manual LOGITECH G9X LASER MOUSE

[. . . ] When it comes to your game, you'll feel the difference in cursor responsiveness and control. The gaming-grade 5000 dpi Laser Engine gives you pixel-precise tracking at any speed. the dpi resolution affects cursor speed across the screen. You can adjust the dpi resolution setting from 200 to 5000 dpi. [. . . ] Out of the box, your G9x comes with 3 preconfigured profiles in on-board memory. You can store up to 2 more on your mouse (choose from the profiles you create in software), or reduce down to a single profile on your mouse. There are many mouse settings that can be configured in a profile. Report rate (125-1000 reports/second) You need to have SetPoint® installed in order to configure your profiles. However, once you set up and save a profile, you can designate up to five of your profiles to be "burned" into your G9x's onboard memory. If you use your mouse on another PC or un-install SetPoint®, your mouse settings for those profiles will still work on your G9x. (Note: There are a few special settings that can only work while SetPoint® is running on your PC; in the case you choose a setting where this is true, SetPoint® will notify you. ) With SetPoint® running, you can also enable Application Detection if you choose. When Application Detection is running, the profiles in on-board memory are not necessarily active (unless you specify application-specific behavior for them). You will not be able to toggle between profiles using your mouse switching buttons. There will be a main profile on your mouse (Profile 1 shipped out-of-box) that will be enabled for all applications when Application Detection is running. You can then designate additional profiles in your Profile Library to run when your PC detects a specific application or game running. Your mouse will automatically employ the designated profile settings once it detects the corresponding application. In all other applications where a specific profile is not specified, the mouse will employ the main profile behavior. The LEDs indicate both dpi and on-board memory profile settings. The G9x allows you to change the color of the LEDs to your preference using SetPoint® software. Choose your favorite colors from a broad color spectrum. You can assign a different color to each profile so you can always tell which profile is enabled by the color of the LEDs. LED settings will always be indicated in ascending order from left to right. The lighting scheme will change depending on the number of dpi and profile settings you choose to have, but in all cases, the LEDs will light up to indicate lowest setting on the left to highest setting on the right. This LED display by default will indicate what dpi setting is active (DPI Mode). When the Profile button (bottom of the mouse) is being pressed (Profile Mode), the LEDs will indicate which profile setting stored in on-board memory is enabled. [. . . ] Logitech may, at its option, use new or refurbished or used parts in good working condition to repair or replace any hardware product. Any replacement hardware product will be warranted for the remainder of the original warranty period, or thirty (30) days, whichever is longer or for any additional period of time that may be applicable in your jurisdiction. Warranty This warranty does not cover problems or damage resulting from (1) accident, abuse, misapplication, or any unauthorized repair, modification or disassembly; (2) improper operation or maintenance, usage not in accordance with product instructions or connection to improper voltage supply; or (3) use of consumables, such as replacement batteries, not supplied by Logitech except where such restriction is prohibited by applicable law. Support Before submitting a warranty claim, we recommend you visit the support section at www. [. . . ]