User manual LOGITECH HARMONY 525

[. . . ] Harmony 525 User Manual version1. 3 Harmony 525 User Manual Table of Contents INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 GETTING TO KNOW YOUR HARMONY REMOTE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 BEGINNING THE ONLINE SETUP PROCESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 USING YOUR HARMONY REMOTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Check Connection: Ensures your computer and your Harmony remote are communicating properly. Set Up Devices: Helps you provide us with information about the devices in your personal home theater system. Set Up Activities: Helps you provide us with information about the way your devices work together to perform Activities (e. g. Update Remote: Updates your remote with your personal settings Note: When using the Harmony Remote Software, click More Help to view specific help for the step you are on. v. 1. 3 page 3 Harmony 525 User Manual Using Your Harmony Remote This section provides you with information that will help you use your remote. Using the Glow Button Press the Glow button to light up or turn off the display backlight. To determine the length of time the backlight stays on. Note: Shaking or tilting the Harmony remote will not light up the display backlight. Users must press the Glow button to light up the display backlight. The remote will go into Deep Sleep mode when the remote detects no motion for two hours. The remote will begin motion sensing in Deep Sleep mode, and any motion or movement in front of the remote will trigger the glow. Use the Harmony Remote Software to enable/disable these features. Displaying Help on Your Harmony Remote From time to time when you select an Activity, the Activity may not work. This can happen when the Harmony remote sends many infrared commands to set up all your devices for an Activity, but one or more devices are not receiving some commands. The Harmony remote is then "out of sync" with your devices (e. g. it thinks one of your devices is on, but it is turned off). Some of the reasons the Harmony remote can become "out of sync" with your system are: · · · · Someone walks between the Harmony remote and your entertainment system while an Activity is starting. You point your Harmony remote away from your system while an Activity is starting. There is an object blocking the line-of-sight between your Harmony remote and the system. You are very far away from your entertainment system. You will need to use the Help button on your Harmony remote to resynchronize the remote with your devices. Before resynchronizing, ensure the cause of the problem has been addressed. Example Remove all obstructions so that the entertainment devices can receive the infrared commands from the Harmony remote. Answer the questions on the remote's display by selecting Yes or No. If you answer no to any question, the Harmony remote will resend the necessary command and ask you the same question again. v. [. . . ] The Harmony Remote Software will try to find a matching pattern for the infrared signal. If no pattern is found, the signal will be stored as-is in its original format. If a pattern is found, the Harmony Remote Software converts the signal into a format for convenient storage. Either way, the signal is then available for you to assign to a button on your Harmony remote. v. [. . . ]