User manual LOGITECH PURE-FI ANYWHERE 2

[. . . ] Your Logitech Pure-Fi AnytimeTM includes both AM and FM radios. To automatically scan for the next station, press and hold the |7 8| buttons until you hear a beep. Depending on your source device, you may need to purchase an adapter cable. Snooze Using the snooze feature will temporarily turn off an active alarm for several minutes ­ allowing you to get a few more minutes of sleep. [. . . ] Snooze Using the snooze feature will temporarily turn off an active alarm for several minutes ­ allowing you to get a few more minutes of sleep. Wave your hand above the speaker (the motion sensor will activate snooze automatically) Note · to set the length of the snooze timer , hold the snooze button ( press the |7 8|buttons to change the snooze length. Your Logitech Pure-Fi AnytimeTM includes two separate alarms. alarm State To enable an alarm: press alarm 1 ( To disable an alarm: press alarm 1 ( ) or alarm 2 ( ) or alarm 2 ( ). Resetting an Alarm Resetting an alarm turns it off for the rest of the current day ­ and automatically turns it on for the following day. This will keep the speakers on and switch to the selected source. notes · An alarm can only be reset if it is either active or snoozed. (Pressing either alarm button if no alarm is active will toggle the alarm state rather than reset it. ) · An alarm will only sound for 60 minutes before automatically resetting itself. Backup Battery Your Logitech Pure-Fi AnytimeTM includes a backup battery to keep your Logitech Pure-Fi AnytimeTM working even during a power outage. Leaving the antenna coiled up will result in poor reception. Make sure the remote sensor isn't being blocked. ⷠTry using a new battery in the remote. The display and controls are too bright / dim. " Depending on your iPod model, these messages may appear when playing iPod playlist presets. Once the music has started playing, the iPod screen will return to normal. It provides two benefits: Motion-activated backlights The button backlights automatically turn on when motion is detected above the speaker, allowing you to adjust the speaker without having to turn on the lights in the room. The backlights will dim a few seconds after motion is no longer detected. Motion-sensing snooze Logitech Pure-Fi AnytimeTM allows you to simply wave your hand above the speaker to activate the snooze feature. This prevents you from having to reach for the snooze button and accidentally knocking your iPod out of the Universal Dock. [. . . ] Motion-sensing snooze Logitech Pure-Fi AnytimeTM allows you to simply wave your hand above the speaker to activate the snooze feature. This prevents you from having to reach for the snooze button and accidentally knocking your iPod out of the Universal Dock. Your iPod battery will charge automatically when your iPod is in Logitech Pure-Fi AnytimeTM's Universal Dock, and connected to A/C power. Your iPod will not charge if the Logitech Pure-Fi AnytimeTM is operating on battery back up power. [. . . ]