User manual LOGITECH V450 NANO CORDLESS LASER MOUSE

[. . . ] English Thank you for purchasing the Logitech® V450 Nano Cordless Laser Mouse for Notebooks. Follow the easy steps in this guide to begin enjoying the features of your new mouse. Slide the Release button on the bottom of the mouse to release the battery door. [. . . ] All other trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice. (The mouse software must be installed to enable this function. The mouse software must be installed to enable these functions. The LED flashes red when batteries are low. The LED glows green briefly when the mouse is turned on. To conserve battery power while the mouse is not in use and the USB Nano-receiver is plugged into your notebook, press the Power button for two seconds to turn off the mouse. Leave the USB Nano-receiver plugged into a notebook USB port, or store it inside the mouse battery compartment. When stored inside the battery compartment, the mouse turns off automatically. When removed from the battery compartment, the mouse turns on automatically. When plugged into your notebook, exercise care when handling your notebook to avoid damage to the USB Nano-receiver or notebook. Use this stand with a desktop computer for easier access to your computer's USB port. Check that the USB Nano-receiver is properly With desktop PCs and if the cordless connection plugged into a USB port on your notebook. [. . . ] Keep the USB Nano-receiver plugged into de encendido durante más de un segundo. the USB port of your notebook but remove all 4. Si el diodo verde está iluminado pero no se mueve other Logitech wireless receivers that may be el puntero en pantalla, desconecte el receptor connected on your notebook. [. . . ]