User manual LORUS 737

[. . . ] s TIME/CALENDAR MODE NREY737C 05-98 Day B C Date PM mark A Hour D Minutes S ec on d s INSTRUCTION MANUAL CAL. Time and calendar: ·Hour, minutes, seconds, year, month, date and day of the week. · Fully automatic calendar: The calendar adjusts automatically for odd and even months including February of leap years. · T i m e i n d i c a t i o n : Changeover between 12- and 24-hour indications is possible. [. . . ] Digits move quickly by keeping button "D" pressed. 3 . Press button "D" to set the flashing digits. One digit is advanced with each press of the button. Digits move quickly by keeping button "D" pressed. After all the adjustments are completed, press button "A" to return to the TIMER mode . * If the watch is left untouched in the timer setting display with the digits flashing, it will automatically return to the TIMER mode in 2 to 3 minutes. Timer operation Press the buttons in the following order. C Start C Stop C Restart ** Time-up * W arning s ound beeps. ** Restart and stop of the timer can be repeated by pressing button "C". * When the set time is up, a warning sound beeps for 20 seconds. To stop it manually, press any of the buttons. After the set time is up, the timer counts up the time up to 59 minutes and 59 seconds. Once the timer is set, the set time is retained and can be used repeatedly unless it is readjusted. C Stop D Reset s ALARM MODE · The alarm can be set to ring on a 24-hour ba sis. s NOTE ON UNUSUAL DISPLAY 5 . After all the adjustments are completed, press button "A" to return to the ALARM mode. When the time function is displayed in the 24-hour indication, the alarm is also displayed in the 24-hour indication. When setting the hour digits in the 12hour indication, check that AM/PM is properly set. In the 24-hour indication, there is no indic a t ion . If the watch is left untouched in the alarm setting display with the digits flashing, it will automatically return to the ALARM mode in 2 to 3 minutes. Engagement/disengagement of the alarm & turning on/off of the hourly time signal · With each press of button "C" in the ALARM mode, the alarm and hourly time signal are engaged and disengaged in the following order. Alarm engaged Hourly time signal engaged Both engaged Neither engaged · At the designated time, the alarm rings for 20 seconds and stop. To stop it manually, press any of the buttons. · The alarm can be tested by keeping button "C" pressed in the ALARM mode. Checking the set alarm time · Press and hold button "D" in the TIME/ CALENDAR mode. [. . . ] Press button "D" to set the flashing digits. One digit is advanced with each press of the button. Digits move quickly by keeping button "D" pressed. After all the adjustments are completed, press button "A" to return to the DUAL TIME mode. [. . . ]