User manual LOWRANCE AIRMAP 100

[. . . ] AirMap 100 INSTALLATION AND OPERATION INSTRUCTIONS ® ® Copyright © 1996, 1997, 1998 Lowrance Electronics, Inc. AirMapTM 100 is a trademark of Lowrance Avionics. Lowrance® is a registered trademark of Lowrance Electronics, Inc. Jeppesen® is a registered trademark of Jeppesen Sanderson, Inc. [. . . ] To view the data for the other runway, press either the right or left arrow key. Now information for runway 1 - 19 is shown. If the airport has more than two runways, simply keep pressing the right or left arrow keys until the desired runway appears. When you're finished with this screen, press the EXIT key to return to the airport database screen. Services To view the services available at the airport, highlight the "SERVICES" label on the AIRPORT main menu shown at the bottom of the previous page, then press the right arrow key. After viewing the information, press the EXIT key. 41 OTHER AVIATION DATABASES The VOR, NDB, and intersection databases work the same as the airport. Simply switch to the desired database, highlight the ID, name, or city (where applicable) and select the location you wish to view. When you're finished with these screens, press the EXIT key to erase them. USER DATABASE - WAYPOINTS This GPS receiver gives you the ability to create your own database of locations, called "waypoints'. You can save your present position, cursor position, or enter a coordinate and save it as a waypoint. For example, you may wish to store the location of your parked car as a waypoint before starting on a hike. When you want to return to the car, all you have to do is recall the waypoint and the unit will show distance and bearing from your present position to the car. Waypoint Menu With few exceptions, in order to save, modify, or recall a waypoint, you'll use the waypoint menu, shown at right. The current waypoint number shows at the top of the screen. Its name appears beneath the "GO TO WPT" label. The waypoint's position, distance and bearing from your present position to the waypoint, and the date and time the waypoint was saved show at the bottom of the screen. It's icon shows just to the right of the distance and bearing. In short, all of the detail about the waypoint shows on this screen. Saving Your Present Position as a Waypoint (Quick Save Method) To save your present position, simply press the WPT key twice. Your current position is placed into the first available waypoint number on the list. A message appears on the display telling you the waypoint number it just used. This also momentarily places you in the waypoint menu. Anytime this menu is showing, simply press the WPT key once and the unit will store your present position on the waypoint list. In this case, waypoint number one was assigned when the WPT key was pressed. 42 Saving The Cursor Position as a Waypoint When the cursor is showing on the map and you press the WPT key twice, the cursor's position is placed into the first available waypoint number. [. . . ] Always use the original shipping container and filler material the product was packed in when shipping your product. 2 Always insure the parcel against damage or loss during shipment. Lowrance does not assume responsibility for goods lost or damaged in transit. For proper testing, repair, and service, send a brief note with the product describing the problem. [. . . ]