User manual LOWRANCE AIRMAP 600C

[. . . ] Handheld Mapping GPS Receiver AirMap 600c Operation Instructions Copyright © 2006 Lowrance Electronics, Inc. No part of this manual may be copied, reproduced, republished, transmitted or distributed for any purpose, without prior written consent of Lowrance Electronics. Any unauthorized commercial distribution of this manual is strictly prohibited. AirMap, Lowrance Avionics and Lowrance are all registered trademarks of Lowrance Electronics, Inc. [. . . ] When flying over the ocean, the surface shading in the Profile Window reverts to a pattern of small Xs, indicating no risk of flying into elevated terrain. All map screens will show the terrain relief shading except for the Navigation Panel and the Aviation Map option. On those screens, the terrain awareness color highlight does appear. 53 Transfer Custom Maps and GPS Data Files Custom maps work only from the MMC card or SDC card. When a card containing a Custom Map File is loaded into the unit, AirMap automatically loads the map into memory when the unit is turned on. Instructions for copying Custom Map Files to an MMC are contained in the instruction manual for your MMC card reader and MapCreate 6 software. For instructions on inserting an MMC into AirMap, see Sec. GPS Data files, containing waypoints, routes, trails and event marker icons, must be copied from an MMC to AirMap's internal memory before AirMap can read them. Press to TRANSFER MY DATA|ENT and the screen in the following image appears. The Transfer My Data submenu asks if you want to save data to the MMC or load data from the MMC into AirMap's memory. 2. The Transfer My Data menu includes a message which tells you if an MMC is present or not. If no MMC is present, you must first insert a card into AirMap in order to activate the Load or Save commands. To transfer data from AirMap to the MMC: press ENT (for SAVE. ) To transfer data from the MMC to AirMap: press to LOAD|ENT. To accept the default name "Data" for the GPS Data File, press to SAVE DATA|ENT. If you wish to rename the file (as in the following example), press ENT to activate the selection box. Press or to change the first character, then press to the next character and repeat until the name is correct. Then, press ENT| to SAVE|ENT. 54 From left to right, these figures show the menu sequence for naming and saving a GPS Data File from AirMap's memory onto an MMC. The unit will display first a progress then a completion message when the data transfer is finished. To return to the Page view, press EXIT|EXIT. Loading: There may be more than one GPS Data File (*. USR) on the card. To select a file, press ENT to activate the selection box, use or to highlight the file, then press ENT to accept the selection. The unit will display a completion message when the data transfer is finished. To return to the Page view, press EXIT|EXIT. From left to right, these figures show the menu sequence for loading a GPS Data File from an MMC into AirMap's memory. Switch to Land Mode To leave Aviation Mode and switch to Land Mode: 1. Press MENU|MENU| to SYSTEM SETUP|ENT| to DISABLE AIRMAP|ENT. 2. [. . . ] We reserve the right to do so without notice. . . . in Canada: If you're in Canada and you have technical, return or repair questions, please contact the Factory Customer Service Department. Before any product can be returned, you must call customer service to determine if a return is necessary. Many times, customer service can resolve your problem over the phone without sending your product to the factory. To call us, use the following toll-free number: 800-661-3983 905-629-1614 (not toll-free) 8 a. m. [. . . ]