User manual LOWRANCE ELITE 5 SONAR

[. . . ] Installation & Operation Installation & Operation manual manual Elite 5 Sonar/GPS & Elite 5m GPS Copyright © 2009 Navico All rights reserved. Lowrance® and Navico® are registered trademarks of Navico. Fishing Hot Spots® is a registered trademark of Fishing Hot Spots Inc. Navionics® is a registered trademark of Navionics, Inc. [. . . ] 83 kHz offers a wider cone angle for more water coverage. Split Zoom and Split Flasher Switches the sonar display from full screen sonar to a split screen view. Frequency menu Split frequency sonar view Split Zoom display Split Flasher display 23 Sonar Operation Color Allow you to change the look of the display using palettes with varying degrees of color and brightness. Ice Mode Turns on a package of sonar settings that enhance the performance of your unit when ice fishing. Stop Sonar Pauses the sonar chart, allowing you to get a closer look at sonar echoes. Nightview Iceview Amplitude Scope Displays the amplitude of realtime echoes before they appear on the display. Fish ID Displays fish echoes as fish symbols instead of arches. Fish ID is not as effective a fish finding method as the default fish arch setting. Overlay Data and Settings Overlay Data is covered in the Basic Operation section. Settings accesses the Settings menu, but will only be shown on the map when the unit is in Advanced mode. 24 Chart Operation Using your Chart This section covers chart operation, which includes saving, loading and navigating, waypoints, routes and trails and using chart menus, context menus and submenus. New waypoint Waypoints, Routes & Trails Settings menu (Advanced mode) Orientation Chart menu Overlay data New Waypoint Creates a waypoint at your current location or at the cursor position. Chart Menu Accesses Chart settings and options like map orientation and waypoints, routes and trails. When the cursor is on the screen, waypoints will be saved at the cursor position; conversely, if the cursor is not displayed onscreen, waypoints will be saved at your current position. 25 Chart Operation waypoints, Routes, Trails Used to create, edit, navigate and delete waypoints, routes and trails. Press the keypad left/right to toggle between waypoint, routes and trails tabs. Delete New Edit Show Delete all Sort Waypoints menu Waypoints Screen Waypoints menu Save to card Load from card Edit Allows you to edit the name, icon and latitude/longitude. of a selected waypoint. 26 Chart Operation new Creates a new waypoint at the cursor or vessel position. You can also select waypoint name, icon and latitude/ longitude from the new waypoint menu. Show Displays the selected waypoint on the map. Goto Allows you to navigate to a waypoint. Delete and Delete All Delete is used to delete a selected waypoint. Delete All deletes all waypoints. Routes screen Routes menu Sort Controls how the waypoints list will be sorted -- by name or by nearest. Routes Screen Used to create, edit, navigate and delete routes. Use the keypad to highlight the Routes tab to access the Routes screen. Creating a route Routes can be created by inserting waypoints from the waypoints list or by using the cursor to position new points on the chart. You can also add waypoints by selecting existing waypoints from the chart. 27 Chart Operation Shows selected route waypoint on the chart Inserts waypoint between existing route waypoints 4. Highlight Waypoint from list and press EnTER. Select the desired waypoint and press EnTER. Press MEnU and select Add to end to add another waypoint to the route. Remove waypoint Adds waypoint to end of the route 8. When the route is complete, highlight the Accept button on the New Route screen and press EnTER. Route waypoint menu Starts navigation to the selected route waypoint Controls how waypoints are listed To create a route from waypoint list: 1. Press the keypad down to select the route screen window and press MEnU. Add waypoints from list or Points from chart. 28 Chart Operation Creating a route using points from chart: 1. [. . . ] The Databases housed in your product are protected by the copyright notices appearing on the product or its screen(s). You may NOT modify, adapt, translate, reverse engineer, decompile, disassemble, rent, lease, or resell any Database, and you may NOT create derivative works based upon any Database or its contents. Any unauthorized reproduction, use, or transfer of a Database may be a crime and may subject you to damages and attorney fees. 44 Cut along this line Worldwide Warranty Registration Form (To register this product online, go to www. lowrance. com and select Register Product. Serial number ________________________________________________________________ name _______________________________________________________________________ Email _______________________________________ Phone ( )_____________________ Address _____________________________________________________________________ Date of purchase __________________ Place of purchase ___________________________ Model name __________________________________________________________________ Warranty Registration Questionnaire Boat Brand: ____________________________________________________ Boat Type (check one): Aluminum bass Kayak Center console Deck Pontoon Runabout Sail Aluminum deep V/Walleye Fiberglass bass boat Fish-n-ski Flats Jon None/Dock/Ice fishing Canoe/ Motor Brand: ___________________________________________________ Number of Motors (check one): 1 2 3 26-50 4 51-75 76-125 Engine Horsepower (check one): 9-15 16-25 126-175 176-225 226-250 250 + Motor Type (check one): Outboard Boat Length (feet): 17 17-20 41-45 46-50 51 + Water Type (check one): Age (check one): 0-25 Fresh 26-35 Inboard 21-25 Salt 36-45 45 Sterndrive 26-30 Brackish 46-55 Jetdrive 31-35 Other 36-40 All of the above. [. . . ]