User manual LOWRANCE GLOBALMAP 12

[. . . ] GlobalMap 12 INSTALLATION AND OPERATION INSTRUCTIONS TM Copyright © 1996, 1997 Lowrance Electronics, Inc. GlobalMap 12TM is a trademark of Lowrance Electronics, Inc. Lowrance® is a registered trademark of Lowrance Electronics, Inc. IMS SmartMapTM is a trademark of Lowrance Electronics, Inc. [. . . ] If you turn the up timer's alarm on (press the right arrow key when the black box is on the (Up ALM. . . Off/On label), it will sound a tone when it reaches the time you entered in the up timer set menu. Press the EXIT key to silence the alarm. You can reset either alarm to the time you originally set by pressing the MENU key, then moving the black box to either the "Up Timer Reset" or "DN Timer Reset" label, then press the right arrow key. 29 REPROGRAM BOXES The digital boxes on the MAP 3 and both NAV screens can be reprogrammed. The changes you make to the screen will remain in memory, even if all power is removed from the unit. You can, however, return the boxes to the factory settings from the "Preset Groups" item in the "System Setup" menu. To customize a screen, first switch to the screen that you want to customize. Map 3 is used as the example on the next page. Next, press the MENU key, then press the up or down arrow key until the "Reprogram Boxes" menu is highlighted. The screen shown as number two at the top of the next page appears. The first window appears on this screen. A description of the window appears in a box on this screen, also. If you wish to use it, simply press the up arrow key. The unit flashes a message on the screen, telling you it's adding the new window to the group. When it's finished, it returns to the box selection menu. You can now press the right or left arrow keys to select the next box in the group. When you're filled the group with boxes, the unit will automatically save your reprogrammed group. If you're finished selecting boxes before filling the group, press the EXIT key. If you fill the group with boxes, the unit will automatically leave the menu after the last box is selected. To return the group to its factory default, see the "Preset Groups" in the "System Setup" section. WAYPOINT DATABASE The GlobalMap 12 gives you the capability of creating your own database of locations, called "waypoints". . You can save your present position, cursor position, or enter a latitude/longitude and save it as a waypoint. The GlobalMap 12 can store up to 250 waypoints. [. . . ] Always use the original shipping container and filler material the product was packed in when shipping your product. 2 Always insure the parcel against damage or loss during shipment. Lowrance does not assume responsibility for goods lost or damaged in transit. For proper testing, repair, and service, send a brief note with the product describing the problem. [. . . ]