User manual LOWRANCE GLOBALMAP 5300C

[. . . ] No part of this manual may be copied, reproduced, republished, transmitted or distributed for any purpose, without prior written consent of Lowrance. Any unauthorized commercial distribution of this manual is strictly prohibited. Points of Interest Data in this unit are by infoUSA, copyright © 2001-2006, All Rights Reserved. infoUSA is a trademark of infoUSA , Inc. [. . . ] There will be two options: Set Reference or Find on Map. Press ↑ or ↓ to change the first character, then press → to the next character and repeat until the distance is correct. Press ↑ or ↓ to change the first character, then press → to the next character and repeat until the bearing is correct. You can simply save the new projected waypoint by pressing EXIT|EXIT or you can edit the waypoint. (Press EXIT|ENT if you want to immediately begin navigating to the new waypoint. ) 72 Section 5: System & GPS Setup Alarms This unit has several GPS alarms. The factory default setting has all of these but the anchor alarm turned on. You can turn the alarms off and on and change their distance settings. You can set an arrival alarm to flash a warning message and sound a tone when you cross a preset distance from a waypoint. For example, if you have the arrival alarm set to . 1 mile, then the alarm will flash a message when you come within . The off course alarm warns you when your track drifts too far to the right or left of the course line to the waypoint. 1 mile, then the alarm flashes a message if you drift . 1 of a mile or more to the right or left of the line to the waypoint. The anchor alarm is triggered when you drift outside of a preset radius. 1 mile as an example, if you're anchored and your boat moves more than . 1 of a mile, the alarm will flash a message and sound a tone. Scroll ↓ ↑ to select the desired category, then press ENT to check or clear the Enabled box. This turns the alarm on (checked) or off (unchecked. To change distance settings, scroll ↓ ↑ to select the desired category, then press → |ENT to activate the distance dialog box. Use ↑ ↓ to change the first character, then press → to the next character and repeat until the name is correct. When your adjustments are finished, return to the last page displayed by repeatedly pressing EXIT. [. . . ] Central Standard Time, M-F 800-324-1356 Lowrance Electronics may find it necessary to change or end our shipping policies, regulations, and special offers at any time. We reserve the right to do so without notice. €in Canada: If you're in Canada and you have technical, return or repair questions, please contact the Factory Customer Service Department. Before any product can be returned, you must call customer service to determine if a return is necessary. [. . . ]