User manual LOWRANCE GLOBALNAV 200

[. . . ] GlobalNav 200 INSTALLATION AND OPERATION INSTRUCTIONS TM Copyright © 1996, 1997 Lowrance Electronics, Inc. GlobalNav 200TM is a trademark of Lowrance Electronics Lowrance® is a registered trademark of Lowrance Electronics WARNING!USE THIS UNIT ONLY AS AN AID TO NAVIGATION. A CAREFUL NAVIGATOR NEVER RELIES ON ONLY ONE METHOD TO OBTAIN POSITION INFORMATION. [. . . ] You can find a waypoint by highlighting the name on the waypoint menu as shown below left. Use the arrow 24 keys to scroll through the saved waypoints. Only waypoints that have a position will show using this method. Edit Name The GlobalNav 200 also lets you assign a name to each waypoint. The name can have up to eight characters. To name a waypoint, first select the waypoint number that you wish to name. Now highlight the "WPT Options" label and press the right arrow key. Finally, highlight the "EDIT NAME" label and press the right arrow key. A screen similar to the one at right appears. Press the up or down arrow keys to select the first letter in the name. Press the right arrow key to move the black box to the next position in the name. Repeat this sequence until you've entered all of the letters in the waypoint name. Press the ENT key to accept this name, the WPT key to erase all characters in the name, or the EXIT key to leave this screen without saving any changes. MOVE A WAYPOINT You can move all information from one waypoint number to another. In this example, we'll move all of the information in waypoint number 10 to waypoint number 20. To do this, highlight the waypoint options label on the waypoint screen and press the right arrow key. Now highlight the "Move WPT" label. The black box is resting on the "From" label. Now press the down arrow key once to highlight the "Number" label. Press the left or right arrow key until the number 10 appears. Now highlight the "TO" label, as shown below. Highlight the "Number" label, then press the right arrow key until the desired waypoint number shows in the box. [. . . ] Always use the original shipping container and filler material the product was packed in when shipping your product. 2 Always insure the parcel against damage or loss during shipment. Lowrance does not assume responsibility for goods lost or damaged in transit. For proper testing, repair, and service, send a brief note with the product describing the problem. [. . . ]